Cars & Other Vehicles

The top half of my refrigerator is not freezing.

The article looks at how to fix a freezer that isn't freezing.You have come to the right place if you have a problem with your freezer.

If the motor of the fan is defined.When you open the door of the freezer, the fan will stop running.When the door is open, the switch should work.The motor should be replaced if it doesn't run after the switch is activated.

The air in the freezer is drawn over the cooling coils by the fan.The freezer will not cool or freeze if it is not able to circulate the air.

This video shows you how to replace a faulty fan motor.

The electrical power source for the freezer needs to be disconnected.Remove the start relay from the compressor and run terminal sockets to make sure everything is ok.If there is no continuity or the relay smells burnt, replace it as soon as possible.

If the start relay is faulty, the compressor may not run.The freezer will not get cold if the compressor does not work well.

If you can see the coils of the freezer.Dust them to remove any leftover dust.The coil will perform better in removing heat from the freezer if it is done this way.

If the inside back panel of the freezer is covered with frost or ice, it's time to check the evaporator coils.If they are, thaw them by using a hair dryer or manually defrosting the freezer to remove the frost.

If your freezer is automatic, you should check the defrost system for faulty components.

This is because the defrost heater should increase.The coils will freeze if this process doesn't happen.The coils won't be able to release cool air for the fan to circulate.

Turn the thermostat from the lowest temperature setting to the highest one to see if it works.Wait to hear the click of the thermostat.The thermostat is working if you hear that click.The thermostat is probably malfunctioning if you don't hear that click.

To make sure it has continuity, test it with a multimeter.The thermostat should be replaced if there is no continuity.

The compressor and fan motor are powered by the temperature control thermostat.If the parts are not working, the system won't work.The freezer won't cool or freeze.

If the blades spin well, you should check them.The motor is probably fine if they do.The bearings of the motor are likely to be worn if they don't.To be certain, use a multimeter to check for continuity.The fan motor should be replaced if you don't find continuity.

A faulty fan motor will not allow the fan to draw.

You can also check the main control board, the user control and display board and the compressor.If the other parts are working well.You will rarely find fault from any of them.

Check the sealed system if the other parts of the freezer are in working order.You will need to replace the freezer or refrigerator if the sealed system is bad.You can't check the sealed system yourself.A qualified refrigerator technician can help you.

obstructions could keep the blades of the fan from spinning.To be sure, check them.Turn them with your hand to see if they spin.The motor is likely to work well if they spin well.Test the continuity of the motor with a multimeter.The fan motor should be replaced if there is no continuity.

There is a faulty condenser fan motor.The refrigerator won't cool.

Dust and dirt can accumulate behind or under the refrigerator's condenser coils.If you have never cleaned them since you bought the refrigerator, most likely they have.

Dust them if there is any remaining dirt.This will make it easier for the coils to get rid of the heat from the refrigerant.The refrigerator will grow warm because the heat won't go to it.

If the blades turn without resistance, it's time to turn the fan.The motor isn't faulty if they do.It is probably time to replace the fan motor if they don't.If the motor is noisier than normal, you can tell it's malfunctioning.If there is continuity, test the windings of the motor with a multimeter.If there is no motor, replace it.

Fix the thermostat from the lowest position.The click tells you that the thermostat is working.If you don't hear the click, you can test the thermostat with a multimeter.The thermostat should be replaced if you don't find continuity at any temperature setting.

The fan motors and compressor are powered by the temperature control thermostat.The refrigerator will not cool if the thermostat is faulty.

Check for continuity by running the start relay and terminals with a multimeter.If there is no continuity, replace the relay.If the relay smells burnt or rattles when you shake it, replace it as soon as possible.

The compressor runs on the start relay.The compressor may not run at all if the relay is faulty.

As of the date/time indicated, the product prices and availability are accurate.The price and availability information displayed on relevant Amazon sites at the time of purchase will apply to the purchase of this product.

The thermistor can be tested using a multimeter.As the temperature of the refrigerator changes, its resistance should change as well.The thermistor should be replaced if the resistance remains the same and there is no continuity.

The air temperature is monitored by the thermistor and sent to the control board.The board can regulate the power to the fan and compressor.The results will be wrong if the thermistor is bad.The control board will not be able to regulate the power to the fan and compressor.They will not run and the refrigerator will be cold.

If you have a multimeter, you can test for continuity.Replacing theCapacitor if there is no continuity.

The compressor needs a boost of power to start.It is unlikely that the compressor will start if theCapacitor cannot provide this.

Check the compressor, the temperature control board or the main controlboard if all of the above parts are working well.It's possible that one or all of them could be bad.The faulty ones should be replaced.Before touching any of the boards or the compressor, be sure the minor parts are not faulty.

It's possible that the power cord of the ice maker isn't fully plugged in.Check the indicator lights to see if the power light is on.

You can check the wall sockets into which it is plugged.It could be malfunctioning or it doesn't have enough power.

The ice maker will stop making ice if the bucket is full.This will free up space and reduce the pressure on the bucket.

It will take a longer time for hot or warm water to freeze than it will for room temperature water.Warm or hot water shouldn't be in the ice maker.It will damage the ice maker and not make ice quickly.

If the water is at the fill line, it's time to check the ice maker.Add water to it if it is not.Reduce the water if it is above the fill line.

Too much water will cause the ice in the bucket to melt.The ice maker can't make ice with a lot of water.

The production of ice can be affected by the temperature in the room where the ice maker is kept.The ice maker won't be able to make ice if the room is too hot.If the ice maker has poor insulation.

No matter how good the insulation is, never store a countertop or portable ice maker in a hot room or close to a heat source.

Here is what to look for if the top shelf.

You can check the fan in the freezer to see if it's frozen or not.If there is ice, thaw it with a safe heat source.The fan motor should be checked if nothing is affecting the blades.A professional technician can take a look at the motor and fix it.

This is the most likely reason why your freezer doesn't freeze in the top shelf.The top half of the freezer will be affected by the circulation of air in it.Leaving the top part without cool air will cause the air to settle at the bottom.The air can move around if the contents of the freezer are moved.

The circulation of air in the freezer can be affected by a blocked air filter.It is most likely to affect the air vent on the top shelf.The top shelf will not cool if the air filter is not replaced.

A leak in the sealed system could be the cause of the freezer not freezing in top shelf.Only a professional refrigerator technician can fix this.It is possible that a leak in the sealed system is an indication that it is time to replace the freezer.If you have been using the freezer for a long time, this is true.The sealed system leak can't be fixed.A new freezer will solve the problem.

If the type of ez_fad_position is 'undefined'.

The top half of my refrigerator is not freezing.

Related Posts: