There are different types of sleeves, such as set-in, raglan, and kimono sleeves.
The sleeve is the part of the garment that covers the arm.The design and function of a garment are supported by sleeves.They are classified into three different types, set-in sleeves, raglan sleeves and kimono sleeves.
The arm of the body is usually covered by the sleeve, which is attached to the armhole.The design and function of a garment are supported by sleeves.In design, sleeves should complement the neckline of the garment and as for functional sleeves, they should provide ease of movement and comfort.Not only does the garment vary in designs and styles, but the sleeves too differ in their construction.It is possible to enhance the appearance of a dress by choosing a sleeve style that suits the figure of the wearer.
There are different types of sleeves, some of them are plain.
There is no fullness at the lower edge or top edge of the plain sleeve.There is a pattern for a short sleeve.The lower edge of the sleeve is called HG.They are side-seams.The ELF is the top edge of the sleeve and is attached to the armhole edge.Other types of sleeves can be developed with a plain sleeve pattern.
The lower edges of the shirt have a cuff.Similar to 34th sleeve preparation, the pattern preparation for this is similar.Until wrist and circumference can be changed, the height must be extended.
The front and back of the kimono sleeves are cut together.The kimono sleeve is cut deeper than the set in sleeve.There is no shoulder seam or armhole seam in these types of sleeves.The sleeve runs from one side of the body to the other.These sleeves are usually preferred for comfortability.Wrinkles under the arm are unavoidable because of the extra fabric between the sleeves.These kinds of sleeves are used in a lot of things.
The sleeves have something attached to them.A diagonal seam is formed when you form the neckline to the underarm.The shoulder seam and armhole sleeve are not needed in these sleeves.The armhole is lowered in order to increase freedom of movement.Extra ease is added across the chest.
The long sleeve has a deep armhole which is towards the wrist.These are called batwing sleeves.The sleeve is cut along the side of the body.The shoulder line should be extended from the tip of the shoulder.Attach the edge to the pattern by drawing the line parallel to it.
Bell sleeves are narrow at the shoulders and widen as they reach the wrist.These sleeves are used for small arms and slim the shoulders.The sleeves can be made into different styles by cutting lengths from the upper arm, elbow, lower arm or wrist.
There are set-in sleeves.The sleeves can be cut to any length.They can be fitted, flared or finished in different styles.The sleeves have to be gathered, darted, tucked and sewn into the seam.
Textile School has knowledge associated with textiles from fibers to its end usage.The site is intended for everyone to learn and share textile knowledge.