There is a fault message in the front right of the Mercedes-Benz R350.
The latest version of the owner's manual can be found online.Since Mercedes-Benz constantly adjusts its vehicles to the latest technology and modifies design and equipment, deviations between this manual and items specific to your vehicle may occur.The printed Owner's Manual that is supplied with the vehicle is not replaced by the online owner' s manual.
The owner's manual can be used to simplify display messages with graphic symbols.
Follow the additional notes in the owner's manual and respond in accordance with the display messages.
An audible warning tone or continuous tone accompanies certain display messages.
You can hide the display message by pressing the button on the steering wheel.
There are messages in red on the display.There are some display messages that cannot be hidden.
Until the causes for the messages have been fixed, the display shows these messages continuously.
Some display messages are saved in the message memory.The display messages can be called up.
The steering wheel has a button on it.There is a menu.
The display shows 2 messages if there are display messages.
Press the button to select the entry.There are 2 messages.
You can scroll through the display messages by pressing the button.
All display messages are deleted when the ignition is turned off.The display messages are deleted when the causes of the high-priority displays have been fixed.
ESP® trailer stabilisation, PRE-SAFE®, the HOLD function, and hill start assist are temporarily unavailable.
The adaptive brake lights may have failed.
There are warning lamps in the instrument cluster.
The functions listed above are not present in the brake system.If you brake hard, the wheels could lock.
The characteristics of steerability and braking may be affected.In an emergency, the braking distance may increase.
ESP® is unable to stabilising the vehicle if it is not operational.
There is an increased risk of skidding.
Carefully drive on a suitable stretch of road, making slight steering movements at a speed above 20 km/h.
Functions mentioned above are available again if the display message disappears.
The ESP trailer stabilisation and hill start assist are unavailable due to a malfunction.
The adaptive brake lights may have failed.
There are warning lamps in the instrument cluster.
The functions listed above are not present in the brake system.If you brake hard, the wheels could lock.
The characteristics of steerability and braking may be affected.In an emergency, the braking distance may increase.
ESP® is unable to stabilising the vehicle if it is not operational.
There is an increased risk of skidding.
You should visit a qualified workshop immediately.
ESP®, BAS, PRE-SAFE®, the HOLD function, hill start assist and ESP® trailer stabilisation are not available due to a malfunction.
The adaptive brake lights may have failed.
The instrument cluster has warning lamps in it.
The self-diagnosis function may not be complete.
The functions listed above are not present in the brake system.If you brake hard, the wheels could lock.
In an emergency, the braking distance may increase.
ESP® is unable to stabilising the vehicle if it is not operational.
There is an increased risk of skidding.
Carefully drive on a suitable stretch of road, making slight steering movements at a speed above 20 km/h.
Functions mentioned above are available again if the display message disappears.
ESP®, BAS, PRE-SAFE®, the HOLD function, hill start assist and ESP® trailer stabilisation are not available due to a malfunction.
The adaptive brake lights may have failed.
The instrument cluster has warning lamps in it.
The functions listed above are not present in the brake system.If you brake hard, the wheels could lock.
In an emergency, the braking distance may increase.
ESP® is unable to stabilising the vehicle if it is not operational.
There is an increased risk of skidding.
ESP® trailer stabilisation, hill start assist, and the HOLD function are all unavailable due to a malfunction.
The adaptive brake lights may have failed.
The instrument cluster contains warning lamps and a warning tone sounds.
The functions listed above are not present in the brake system.If you brake hard, the wheels could lock.
The characteristics of steerability and braking may be affected.In an emergency, the braking distance may increase.
ESP® is unable to stabilising the vehicle if it is not operational.
There is an increased risk of skidding.
You should visit a qualified workshop immediately.
A warning tone is made by the red indicator lamp.There is still a condition for automatic release of the electric parking brake.
A warning tone is made by the red indicator lamp.
The electric parking brake is being used to make an emergency stop.
The parking brake handle needs to be pressed for at least ten seconds.
There are two lamps, the yellow warning lamp and the red indicator lamp.
Turn the ignition off and then on again.
The parking brake should be released manually.
The electric parking brake should be released more.
There is a red lamp and a yellow lamp.
The lamp is yellow.After the electric parking brake has been applied or released, the red indicator lamp flashes.It can either go out or remain lit.
The electric parking brake should be released more.
The lamp is yellow.The red indicator lamp will flash if you manually apply or release the parking brake.
The parking brake is malfunctioning.The electric parking brake can't be applied manually.
The lamp is yellow.After the electric parking brake has been applied or released, the red indicator lamp flashes.It can either go out or remain lit.
The electric parking brake is malfunctioning.Because of something.
Refer to the cause of the overvoltage.By restarting the engine or charging the battery.
While the vehicle is moving, the display message is shown.There is a red lamp and a yellow lamp.
The electric parking brake can't be applied manually.
The electric parking brake was trying to be released.
The key should be turned to position 1 in the lock.
There is not enough brake fluid.There is a warning lamp in the instrument cluster.
Paying attention to road and traffic conditions, pull over and stop the vehicle as soon as possible.Don't drive under any circumstances.
Don't top up the brake fluid.This doesn't correct the fault.
The functions of PRE-SAFE have failed.All occupant safety systems.There are still bags available.
You should visit a qualified workshop immediately.
The adaptive brake assist is temporarily inoperative in vehicles without the active driving assistance package.There are possible causes.
Heavy rain or snow can affect the function.
The radar sensor system is malfunctioning.The source of the radiation is TV or radio stations.
The system is not in the operating temperature range.
The display message goes out when the causes no longer apply.
Paying attention to road and traffic conditions, pull over and stop the vehicle as soon as possible.
The PRE-SAFE® Brake is temporarily malfunctioning.There are possible causes.
Heavy rain or snow can affect the function.
The sensors in the bumpers are dirty.
The radar sensor system is malfunctioning.The source of the radiation is TV or radio stations.
The system is not in the operating temperature range.
The display message goes out when the causes no longer apply.
Paying attention to road and traffic conditions, pull over and stop the vehicle as soon as possible.
The grille and bumper should be cleaned more.
The adaptive brake assist is malfunctioning in vehicles without the active driving assistance package.The function may have failed.
The PRE-SAFE® Brake is malfunctioning in vehicles with the Active Driving Assistance package.The distance warning function may have failed.
If the symbol appears in the display, a seat belt tongue has to be put into the belt.
The rear seat belts have a status indicator.
If the symbol appears in the display, the tongue of the seat belt is missing.
The intended level of protection cannot be provided by a seat belt that is not worn correctly.
Ask the people in the rear to wear their seat belts more.
The rear seat belts have a status indicator.
TheSupplemental Restraint System has a malfunction.
The instrument cluster has a warning lamp.
In the event of an accident, the belt tensioners may not be triggered.
There is a malfunction at the front on the left or right.The instrument cluster has a warning lamp.
In the event of an accident, the belt tensioners may not be triggered.
There is a malfunction at the rear on the left or right.The instrument cluster has a warning lamp.
In the event of an accident, the belt tensioners may not be triggered.
There is a malfunction at the rear centre.The instrument cluster has a warning lamp.
In the event of an accident, the belt tensioners may not be triggered.
There is a malfunction in the windowbag.The instrument cluster has a warning lamp.
In the event of an accident, the left or right windowbag may not be triggered.
Should you be allowed to replace the bulb yourself more?
The trailer turn signal lamp is malfunctioning.
There are separate operating instructions provided by the trailer manufacturer.
There is a faulty turn signal.
Should you be allowed to replace the bulb yourself more?
The turn signal on the left or right side is malfunctioning.
The turn signal in the exterior mirror is not working.
Should you be allowed to replace the bulb yourself more?
Should you be allowed to replace the bulb yourself more?
Should you be allowed to replace the bulb yourself more?
Should you be allowed to replace the bulb yourself more?
There is a faulty daytime driving lamp.
The light system is malfunctioning.The lights are still available without the Intelligent Light System.
The blown fuse needs to be replaced.As you watch the warning notes, keep an eye on them.
When you leave the vehicle, the lights are on.A warning tone can also be heard.
The camera's field of vision is dirty.
Heavy rain, snow or fog can affect visibility.
The adaptive highbeam assist message is displayed if the camera is fully operational again.
Too little cooling in the engine cooling system can cause long journeys.The engine will be damaged.
Before you do anything more, make sure to look at the warning notes.
If the engine coolant system needs to be checked more often, it's a good idea to have it done at a specialist workshop.
The fan motor isn't working.
You can continue driving if the temperature is below 120.
As you do so, avoid heavy loads on the engine.Stop-start traffic and driving in mountainous terrain.
Don't drive with an overheated engine.The fluids in the engine compartment can catch fire if your engine is overheated.
By opening the bonnet, steam from an overheated engine can cause serious burns.
There is a chance of injury.
To stop the vehicle, pay attention to the road and traffic conditions, and switch off the engine.
The vehicle should be secured against rolling away.
Wait until the engine cools down.
Make sure the air supply to the engine is not blocked.The slush was frozen.
The display message should tell you not to start the engine again.There is a chance that the engine may be damaged.
Pay attention to the display.
You should visit a qualified workshop if the temperature increases again.
The temperature may rise to 120 under normal operating conditions.
There is a malfunction in the electronics.
To stop the vehicle, pay attention to the road and traffic conditions, and switch off the engine.
Do you know if the poly-V-belt is torn?
Do not drive.The engine could start overheating.
A workshop is a qualified one.
You can visit a workshop.
The minimum engine oil level has been reached.
A warning tone can also be heard.
At the latest, check the oil level.
If necessary, top up the engine oil.
If the engine oil needs to be topped up more often, it's a good idea to have it checked out.
Information on approved engine oils can be found on the Internet or at a qualified specialist workshop.
The engine oil level is too low.
At the latest, check the oil level.
If necessary, top up the engine oil.
If the engine oil needs to be topped up more often, it's a good idea to have it checked out.
Information on approved engine oils can be found on the Internet or at a qualified specialist workshop.
The reserve range has the fuel level in it.
If the fuel level drops into the reserve range, the auxiliary heating operation is stopped.
You can refill at the nearest filling station.
There isn't much fuel in the tank.
The auxiliary heating can't be used.
You can refill at the nearest filling station.
Vehicles with a diesel engine have dirty air filters.
You can visit a workshop.
Vehicles with a diesel engine have water in their fuel filters.The water needs to be drained off.
You can visit a workshop.
The AdBlue® level is below the reserve range.A warning tone can also be heard.
AdBlue can be refilled at a specialist workshop.
As soon as possible, add at least 3.5 l of AdBlue®.
The distance is indicated by the AdBlue® level.A warning tone can also be heard.
AdBlue can be refilled at a specialist workshop.
Add at least 3.5 l of AdBlue.
The AdBlue tank is empty.A warning tone can also be heard.You can't start the engine anymore.
A qualified workshop is needed immediately.
Add at least 3.5 l of AdBlue.
The AdBlue system is malfunctioning.A warning tone can also be heard.
You can visit a workshop.
The AdBlue system is malfunctioning.A warning tone can also be heard.
You should visit a qualified workshop immediately.
The AdBlue system is malfunctioning.A warning tone can also be heard.You can't start the engine anymore.
A qualified workshop is needed immediately.
ATTENTION ASSIST has detected fatigue or a lack of concentration on the part of the driver.A warning tone can also be heard.
Taking regular breaks during long journeys will give you enough rest.
You are driving too fast.
The trailer-coupling sockets are being used.There is a bicycle rack.
If you want to select the desired vehicle level again, drive more slowly.
You have chosen a higher level.The compressor needs to cool down.
Drive according to the current vehicle level.
There needs to be enough ground clearance.
The display message disappears when the compressor cools down.The vehicle continues to rise.
Do not drive faster than 80 km/h.
There needs to be enough ground clearance.
The vehicle should be checked at a specialist workshop.
You are speeding over the limit for the off-road level.
There is a vehicle level display between the vehicle symbol and the display message.
Changing your driving style will affect the handling characteristics.
Don't make fast steering movements.
Don't go over 20 km/h until you reach off-road level 2.
The Active Curve System is malfunctioning.It is possible that the vehicle's handling characteristics will be affected.
The vehicle should be checked at a specialist workshop.
The Active Curve System is malfunctioning.The vehicle's handling characteristics are not good.A warning tone can also be heard.
Changing your driving style will affect the handling characteristics.
It's a good idea to avoid sudden acceleration in tight corners.
You should visit a qualified workshop immediately.
Raising Max.20 km/h.
The vehicle is being adjusted.The maximum speed is shown on the display message.
Lowering the max.20 km/h.
The vehicle is being lowered from a higher level.The maximum speed is shown on the display message.
Don't go over 20 km/h until you reach off-road level 2.
The vehicle should be checked at a specialist workshop.
As the differential lock cools down, it re-engages.
The gearshift process has been stopped.The range is neutral.There is no connection between the drive wheels and the engine.
Paying attention to road and traffic conditions, pull over and stop the vehicle as soon as possible.
The electric parking brake should be applied.Don't drive under any circumstances.
Don't let the vehicle roll away when parking.
The vehicle should be checked at a specialist workshop.
The gearshift process has a maximum speed.
The gearshift process has a maximum speed.
The automatic transmission is not in position after you reduced the vehicle speed.
The automatic transmission should be shifted to position N.
DSR is down due to a fault.
DSR can be checked at a specialist workshop.
The camera's field of vision is dirty.
Heavy rain, snow or fog can affect visibility.
The display message disappears if the camera is fully operational.
Speed Limit Assist is only available in certain countries.
As soon as you drive into a country that approves the use of Speed Limit Assist, it will be available again.
The hold function is no longer active.The vehicle is skidding.
The Lane Keeping Assist is currently unavailable.
Lane Keeping Assist is temporarily inoperative.There are possible causes.
The camera's field of vision is dirty.
Heavy rain, snow or fog can affect visibility.
The lane markings are worn or covered.by dirt or snow.
The display message goes out when the causes no longer apply.
Active Lane Keeping Assist is operational again.
Paying attention to road and traffic conditions, pull over and stop the vehicle as soon as possible.
The Lane Keeping Assist is malfunctioning.
Blind Spot Assist is currently unavailable in the owner's manual.
Blind Spot Assist is temporarily out of commission.There are possible causes.
Heavy rain or snow can affect the function.
The operating temperature range is outside the radar sensor system.
The radar sensor system is malfunctioning.The source of the radiation is TV or radio stations.
The exterior mirrors have yellow indicator lamps on them.
The display message goes out when the causes no longer apply.
There is an active Blind Spot Assist.
Paying attention to road and traffic conditions, pull over and stop the vehicle as soon as possible.
Blind Spot Assist is not used while towing a trailer.
The trailer and vehicle have an electrical connection.
To confirm the display message, press on the steering wheel.
The exterior mirrors have yellow indicator lamps on them.
The driver's seat belt has not been fastened.
Place the seat belt on and the driver's door closes.
The steering intervention was active when you touched the steering wheel.
Don't touch the steering wheel while steering intervention is active.
A lot of turning and parking maneuvers have just been carried out.
After ten minutes, active parking assist will be available again.
Paying attention to road and traffic conditions, pull over and stop the vehicle as soon as possible.
A warning tone also sounds if it was deactivated automatically.
After being temporarily unavailable, DisTRONIC Plus is back up and running.You can do more with DisTRONIC.
Heavy rain or snow can affect the function.
The sensors in the bumpers are dirty.
The radar sensor system is malfunctioning.The source of the radiation is TV or radio stations.
The system is not in the operating temperature range.
The display message goes out when the causes no longer apply.
Paying attention to road and traffic conditions, pull over and stop the vehicle as soon as possible.
The grille and bumper should be cleaned more.
The pedal has been depressed.The speed of the vehicle is no longer controlled by DisTRONIC.
There is an activation condition for DisTRONIC.
There are activation conditions for DisTRONIC.
DisTRONIC Plus and SpeedTRONIC are unreliable.A warning tone can also be heard.
SpeedTRONIC can't be activated while depressing the pedal beyond the pressure point.
There is a condition that has not been met.
You have tried to keep the speed below 30 km/h.
If conditions allow, drive faster than 30 km/h.
Check the conditions for cruise control.
120 km/h!
For certain countries, the maximum speed has been exceeded.
The display shows 120 km/h..
A significant loss in pressure has been detected by the tyre pressure loss warning system.
The load and vehicle speed can cause the tyres to burst.
It is possible that the tyres may wear excessively and/or unevenly.
It is possible that the driving characteristics, as well as steering and braking, may be impaired.
Don't make any sudden steering or braking maneuvers.As you watch the traffic conditions, pay attention to them.
Follow the instructions for a flat tire if necessary.
If necessary, correct the tyre pressure.
When the tyre pressure is correct, restart the tire pressure loss warning system.
Check the pressures of the tires.
The tire pressure loss warning system hasn't been started since it generated a display message.
All four tires should be set with the correct pressure.
The tyre pressure loss warning system needs to be restarted more.
The tire pressure is too low in at least one of the tires.
The next opportunity is to check the tire pressures.
The pressure on one or more tires has dropped.The display shows the wheel position.
The load and vehicle speed can cause the tyres to burst.
It is possible that the tyres may wear excessively and/or unevenly.
It is possible that the driving characteristics, as well as steering and braking, may be impaired.
Don't make any sudden steering or braking maneuvers.As you watch the traffic conditions, pay attention to them.
Follow the instructions for a flat tire if necessary.
There has been a sudden drop in the tyre pressure.The display shows the wheel position.
The ability to steer or brake is affected by a flat tire.
excessive heat build-up and possibly a fire can be caused by driving with a flat tire.
Don't make any sudden steering or braking maneuvers.As you watch the traffic conditions, pay attention to them.
Follow the instructions for a flat tire if necessary.
No signals can be received from the wheel sensors due to radio interference.The tire pressure monitor is malfunctioning.
As soon as the cause is fixed, the tire pressure monitor restarts.
There is no signal from the tire pressure sensor.The tire pressure is not displayed in the display.
The faulty tyre pressure sensor needs to be replaced.
The wheels don't have a tire pressure sensor.The tire pressure monitor is off.
There are tyre pressure sensors for fitting wheels.
After driving for a few minutes, the tire pressure monitor is activated.
You tried to start the engine with the transmission in R or D.
The automatic transmission's auxiliary battery is no longer being charged.
At the next opportunity, visit a qualified specialist workshop.
Before you switch off the engine, set the automatic transmission to position P.
The electric parking brake should be applied before leaving the vehicle.
You tried to move the transmission lever without the brake pedal being depressed.
The transmission is in position R, N or D because the driver's door is open.
You can't change the transmission position because of a malfunction.
Shift the transmission from position D to drive to a qualified specialist workshop.
Paying attention to road and traffic conditions, pull over and stop the vehicle as soon as possible.
Exhaust gases can enter the vehicle if the tailgate is open.
When the vehicle is moving, the open bonnet may block your view.
Paying attention to road and traffic conditions, pull over and stop the vehicle as soon as possible.
The active bonnet is not active because of a malfunction or because it has already been triggered.
To stop the vehicle, pay attention to the road and traffic conditions, and switch off the engine.
The trailer is in the end position.
Check to see if you can apply the extra force.
Carefully drive to a qualified workshop if you are able to steer safely.
Do not drive on if you can't steer.You can contact a specialist workshop.
You tried to switch on the auxiliary heating or activated the departure time using the on-board computer, but failed.
The board's on-board voltage is too low.The auxiliary heating can't be switched on more.
The battery is being charged.As soon as the on-board electrical system voltage is sufficient, the auxiliary heating is back to normal.
There is not enough fuel in the tank.The auxiliary heating can't be turned on more.
The auxiliary heating is malfunctioning.
Wait several minutes between each attempt to switch on the auxiliary heating when the vehicle is on a level surface.
A qualified specialist workshop can help if the auxiliary heating doesn't work.
Your vehicle is not in the range of the network provider.
Wait until the mobile phone operational readiness symbol is on the display.
The washer fluid level is below the minimum.
The red display message did not detect the key.
If the engine is turned off, you can't start the vehicle.
Paying attention to road and traffic conditions, pull over and stop the vehicle as soon as possible.
There is interference from a strong source of radio waves that prevents the Keyless-Go key from being detected.
Paying attention to road and traffic conditions, pull over and stop the vehicle as soon as possible.
If necessary, open the vehicle with the key in the ignition lock.
The white display message did not detect the key.
Keyless-go can be used to change the location of the key.
If necessary, open the vehicle with the key in the ignition lock.
The keys have been detected inside the vehicle.
Keyless-Go is malfunctioning.A warning tone can also be heard.
Turn the key into the ignition lock when you insert it.