There is a problem with the dryer model # DV42H5000ew/A3 that is not working.
I know, I've seen it all before, but my dryer doesn't have enough heat to dry clothes.The instructions and parts you need to fix the problem can be found on this page.I can help you figure out the "No heat or not enough heat" problem for your dryer.
There are good videos for removing the drum from the dryer.The heating element was tested to see if it was bad.The replacement element was delivered on Thursday afternoon after being ordered on Monday night.The referenced part was replaced with the element.It works like a champ.
I ordered a heating element from appliancepartspros.com.The unit was shipped to me quickly.I was provided with a repair video by appliancepartspros.com.I changed out the part with a screwdriver.Your website was helpful.Thanks to appliancepartspros.com.
The first thought I had was that the problem was the thermal fuse.Before I got out my Fluke meter, I ordered one and found the fuse was good.The heating coil was open after I checked all of the remaining points.I ordered one and it was delivered on time.The model depicted in the video was not the same as the one I watched to aid in removal.If you've seen one of their machines, it's not much different than the other ones.I was surprised to see the coil burned into at one point.I was expecting to find a load of lint, but it wasn't there.My son's dryer is only six months old.He bought a matching set of LG's.For the past five years, I have had no problems with my washer and dryer.If need ever arises, I repaired this machine as a back up.
The wife wanted to replace.Fast shipping.After watching the repair video, it was easy to install the element.Within an hour, back up and dry.I saved a few grand and my wife was happy.It was a great experience.
The repair was completed in record time due to the excellent step by step video.I chose this company because of their elaborate how to videos for each and every part they sell.Not being mechanically inclined and a widowed senior citizen was a priority.
We considered spending $200 to have someone fix our dryer or buy a new one.I know how easy it is to get parts on your site.The repair went great after we followed your repair video step by step.The dryer is working again for less than $100.
The restring coil is already attached to the dryer heating element for easy installation.
The part was ordered from Appliance Parts Pros.It was installed in minutes.It was perfect!Great service.Thank you, Magicmike717.
After checking that the vent hose was not blocked, I decided that it was most likely the thermistor.
It is not fixed.The owners manual requires the thermistors to read 10 ohms resistance.I bought all 3 of them.The T5-1000 meter is used.A quality tool.
I was researching the error code on the internet.I came to the conclusion after watching video's that the problem was caused by the thermistor.I called local appliance parts stores to get the part.I paid double what they charged at Appliance parts pros.I got the part the next day.I replaced it myself.It took me 20 minutes.There is aPhillips head screwdriver.
I watched the video on the heating element.It is very easy to repair.The control panel showed a message after installing a new heating element.I got my answer within 24 hours after I asked about it on the forum.The thermistor was faulty.I watched the video on how to replace the thermistor.It's a must to vacuum the dryer from time to time.At least $200 was saved.
I watched your videos and thought it was the thermistor.The dryer still didn't work after I replaced it.There was no continuity at the thermal fuse after I metered everything.The dryer is working again after I replaced it.The poor installation of the vent piping may have caused an overheating condition.
There were trouble shooting instructions on the APP website.There is "no continuity" in the fuse.The correct fuse was installed per the order.Repairs went well.It is easy as can be.I have never had any prior experience with this machine.
The thermal fuse was the problem after I checked the heating coil.I replaced the fuse that I ordered.
I found this part online.The information provided by the provider was helpful.The dryer worked again after the part was replaced.
It takes about 15 minutes to replace the video.If you want to save time and money, order the full heating element, it costs about $30 more, but will save you time, and everything will be new.
When I placed the order for the element from Appliance Parts Pros.com, there was a repair video that I was able to watch.It was very easy because they gave step by step instructions.Customer service was friendly and knowledgeable.The appliance service company wanted $400 for the part alone, but this process saved me $500.I would encourage everyone to order from this company.
The Thermal Fuse was delivered in two days.It worked perfectly after I popped it in.Who knows how much they would have charged for the part after saving at least $125 on a service call.