The shemagh is a traditional Middle Eastern scarf that protects the head and face from harsh weather conditions.The wrap is worn by many outdoorsmen and survivalists.There are a number of ways to wear the shemagh.If you're new to this garment, here are a few tying methods to try.
Step 1: The shemagh should be folded into a triangle.
If the shemagh is completely open, place one corner with the corner opposite from it in a triangle.If you want to use the shemagh to protect your head and face from cold winds or hot sun, this particular tying method is a good option.
Step 2: You should drape the shemagh over your head.
Take the folded edge of the shemagh over your forehead and place it between your eyebrows.The excess material should not be in front of your face.If you have tied a bandana in the past, it is a good idea to act as if you are about to tie a large bandana.The middle of the shemagh should be resting on your head if you position the folded edge.
Step 3: You can put the right side under your chin.
Pull the right side to the left so that it covers your chin.Pull the end toward the back of your head.While working with the left side, hold the end in place with your left hand.To be effective, a shemagh needs to be tight.
Step 4: Wrap the left side of your face.
Pull the folded edge of the left side across your face with your right hand.The left side of the shemagh should drape over your nose and mouth.Pull the right end over your shoulder and back of your head.
Step 5: At the back of your head, tie the two ends of the rope.
To secure the shemagh, use a tight overhand or double knot.If you want the shemagh to stay on your face, you need a tight knot at the back of your head.Don't tie the knot so tightly that it makes it difficult to breathe or turn your head, but make sure the material is taut against all parts of your neck, face, and head.
Step 6: As needed.
If you want the material to cover your head and lower half of your face, you need to adjust the shemagh.The shemagh is complete after this step.This wrapping style can be used in many different ways.If you want to create a simple headwrap, you can either pull the bottom off your face or pull both the top and bottom portions down so that they sit around your neck.
Step 7: The shemagh should be folded into a triangle.
If the shemagh is completely open, place one corner with the corner opposite from it in a triangle.If you want to use the shemagh to protect your head and face from cold winds or hot sun, this particular tying method is a good option.It's good if you want to protect yourself from breathing in sand or debris.
Step 8: You should drape the shemagh over your head.
Take the folded edge of the shemagh over your forehead and place it between your eyebrows.The excess material should not be in front of your face.You can choose a point along the folded edge.There should be more material on the right side.If you've ever tied a bandana, it's a good idea to hold the shemagh over your head as you prepare to tie it.
Step 9: The shorter end needs to be pulled under your chin.
Wrap the shorter side of the shemagh under your chin and up toward the back of your head.With your right hand, hold this piece.Don't put the end in the rest of the shemagh fabric.
Step 10: The longer side should be wrapped across your face.
Pull the right side or the longer side across your face so that it covers your mouth and nose.
Step 11: Wrap the long side over your head.
Wrap the longer end of the scarf around your head.The edge should drape over your head, and the end should meet the opposite side.One hand should hold the first end against the side of your head while the other holds the second end.
Step 12: The two ends have to be tied together.
The shemagh needs to be secured with two overhand knots.Don't tie the knot so tightly that it makes it difficult to breathe or turn your head, but make sure the material is taut against all parts of your neck, face, and head.
Step 13: Any necessary adjustments need to be made.
If you want the material to cover your head and lower half of your face, you need to adjust the shemagh.The shemagh is complete after this step.The shemagh cannot be pulled down off the head and turned into a scarf in this style.This is a secure wrapping style that protects your head more than the traditional or casual style mentioned here.
Step 14: The shemagh should be folded into a triangle.
If the shemagh is completely open, place one corner with the corner opposite from it in a triangle.It can be a trendy and casual way to wear a shemagh.
Step 15: The fabric should be placed over the lower part of your face.
The shemagh should cover your mouth and nose.Two corners should appear on either side of your face, and the other should drape over your neck and chest.
Step 16: Wrap the ends around your neck.
The short ends should be around the back of your neck.Put them in place.Keep the shemagh taut against your face by holding the ends up.At the back of your neck, tie a single knot.The knot needs to be tight enough to hold the shemagh in place but not so tight that you can't breathe or turn your head.
Step 17: You should let the ends hang over your chest.
If you want the left and right ends of the shemagh to drape over your chest, you have to put your shoulders back.You don't need to hide them.
Step 18: As needed, adjust.
If you want the shemagh to rest just below your chin and around your neck, you need to tug on the top part.This is the end of the method.
Step 19: The shemagh needs to be folded into a triangle.
If the shemagh is completely open, place one corner with the corner opposite from it in a triangle.It can be a trendy and casual way to wear a shemagh.
Step 20: Wrap the fabric around your face.
The shemagh should cover your mouth and nose.Two corners should appear on either side of your face, and the other should drape over your neck and chest.
Step 21: Don't tie the ends around your neck.
The short ends should be brought to your left and right over your shoulders.You should cross them over each other at the back of your neck.Keep the shemagh taut against your face by holding the ends up.The shemagh should not be behind your neck for this style.The two ends should only cross over once.Bring the two ends back over the shoulder so that you can see them over your chest.Don't let go of the ends yet.
Step 22: You should tie the ends in front of you.
Tie the two ends in front of you.The ends should be hidden under the long end or corner of the shemagh.A single knot is used at the center of your neck.The knot needs to be tight enough to hold the shemagh in place but not so tight that you can't breathe or turn your head.
Step 23: The shemagh should be tucked into your jacket.
Tuck the ends of the shemagh underneath if you are wearing a jacket, blazer, or other form of outerwear.The jacket can be partially button or zip up to hide the ends.This step is optional.If you want, you can leave the ends out of your jacket.It can make the style look a little more relaxed.
Step 24: As needed.
If you want the shemagh to rest just below your chin and around your neck, you need to tug on the top part.This is the final step in the tying method.
Step 25: To make a triangle, fold the Shemagh in half.
Step 26: Pull it over your face and hold it.
Step 27: Wrap the two loose ends around to the front of the neck.
Step 28: Pull to the back again.
As needed, adjust to not choke yourself out.