A ratcheting socket wrench commonly known as a ratchet is a mechanical tool that tightens and loosens nuts and bolts more efficiently than other wrenches. Ratchets attach to different sized sockets, making them a versatile tool for your toolbox.
What's the difference between wrench and socket wrench?
The ratcheting mechanism of a socket wrench makes the task of tightening or loosening nuts faster and easier compared to a conventional wrench. An advantage of an open-end wrench relative to a box or socket wrench is that it allows sliding the wrench into position from the side of the nut or bolt.
What is a socket wrench called?
A socket wrench (or socket spanner) is a type of spanner (or wrench in North American English), that uses a closed socket format, rather than a typical open wrench/spanner to turn a fastener, typically in the form of a nut or bolt.
What are the 3 types of socket wrenches?
- #1) Ratcheting. Ratching is the most common type of socket wrench.
- #2) Flex Head. There are flex-head socket wrenches that have a swiveling head.
- #3) T-Handle. One of the most basic types of socket wrenches is the T-handle.
- #4) Nut Driver. Another type of socket wrench is nut driver.
- #5) Gearless.
What is the open end of a wrench called?
The recess is generally a six-point or twelve-point opening for use with nuts or bolt heads with a hexagonal shape.
What are the parts of a wrench called?
A combination wrench is essentially three parts: an open end, a beam and a boxed end. Despite only having three parts, there are a few different ways to shape them.9 Jul 2018
What are the two ends of the wrench called?
A double-ended tool with one end being like an open-end wrench or open-ended spanner, and the other end being like a box-end wrench or ring spanner. Both ends generally fit the same size of bolt. A wrench that is used for gripping the nuts on the ends of tubes.
What goes on the end of a wrench?
wrenches. Box-end wrenches have ends that enclose the nut and have 6, 8, 12, or 16 points inside the head. A wrench with 12 points is used on either a hexagonal or a square nut; the 8- and 16-point wrenches are used on square members.
What are the 3 types of sockets?
- Stream sockets allow processes to communicate using TCP. A stream socket provides bidirectional, reliable, sequenced, and unduplicated flow of data with no record boundaries.
- Datagram sockets allow processes to use UDP to communicate.
- Raw sockets provide access to ICMP.
What are the 3 socket wrench sizes?
There are four common socket sizes: 1/4 inch (0.6 centimeters), 3/8 inch (0.9 centimeters), 1/2 inch (1.3 centimeters) and 3/4 inch (1.9 centimeters).25 Jul 2011
What are all the different types of sockets?
- Stream Sockets. These sockets are used on the delivery side of the network environment.
- Datagram Sockets. The implementation doesn't give any guaranteed delivery as they work connectionless.
- Raw Sockets.
- Packet Sequenced Sockets.
- Hex Sockets.
- Socket Bit.
- Impact Sockets.
- Spark Plug Sockets.
What are open ended wrenches used for?
Open-End Wrenches The flat jaws of these wrenches are slid around nuts or bolt heads and levered for loosening or tightening. The open ends allow the tool to be slid over the nut in tight quarters where there would be insufficient space for a box wrench or a socket, or where the length of a shaft or pipe interferes.12 Mar 2021
What does open-end wrench mean?
Definition of open end wrench : a wrench with jaws having a fixed width of opening at one or both ends of the handle.
What does a closed end wrench do?
A box, or closed, end wrench is used where there is room to place the wrench mouth around the fastener. Box end wrenches are available in 6- and 12-point versions to match the number of sides on the fastener. Hexagon fasteners have 6 sides, or points, and are the most popular.