A bumper spike is used to rest the chain saw on wood as you are cutting to prevent kick- back, especially when performing a buck cut. An anti-kickback chain reduces the forces on the chain that cause kickback. A tip guard at the end of the chainsaw bar helps prevent kickback.
What are the parts of a chainsaw chain called?
- Cutter.
- Rivet.
- Drive Link.
- Tie Strap.
Are there different types of chainsaw blades?
There are four main chainsaw blade / cutter styles, these are; square chisel, full chisel, semi-chisel and low profile. But then there are some variations of these four styles on the market, that we also go into detail about below. Read on to see the main chainsaw blade styles and their applications.
How do you count the teeth on a chainsaw?
To determine the pitch (chain size), you'll need to measure the distance between any three consecutive rivets, then divide the result by 2. The rivets are the small, round pegs/studs that hold the chain segments together. Measure from the first to the third, then divide that number in half to get your chain pitch.
Is more teeth on a chainsaw chain better?
The rule of thumb is that a saw blade with more teeth means a smoother cut and fewer teeth means a faster cut. ... Depending on which way you are cutting the wood, you may want a saw blade with more or less teeth. If you are ripping wood you are cutting in the same direction that the wood fibers run.Jan 15, 2013
Is it better to have more or less teeth on a saw blade?
Blades with more teeth yield a smoother cut. Blades with fewer teeth remove material faster, but tend to produce a rougher cut with more “tearout”. More teeth means you will need to use a slower feed rate.Sep 15, 2016
Is more teeth on a saw blade better for metal?
Generally, the higher the amount of saw blade teeth, the better the quality of cut and finishing. ... When blades have fewer teeth, they have deeper gullets (space in between teeth) which creates a more aggressive chiselling action.Feb 13, 2020
Is more teeth better for cutting wood?
Standard circular saw blades are typically used to cut wood or wood composites. The number of teeth on the blade helps determine the speed, type and finish of the cut. Blades with fewer teeth cut faster, but those with more teeth create a finer finish.
What is a 14 inch chainsaw good for?
In chainsaw descriptions, the term "light use" covers pruning trees and shrubs, and general maintenance. Light-use chainsaws' cutting bar typically is under 14 inches long. Pruning ornamental trees and shrubs that don't have thick branches is simple with these novice-friendly models.
How many drive links in a 15 inch chain?
64 drive links
How many drive links in a 16 inch chain?
Bar length refers to the amount that is actually exposed to the cut, not the overall length. A 16" bar normally requires 66 drive links with .May 20, 2013
How many teeth does a 14 chainsaw have?
Replacement 14" Single Rivet Bar and 14" Semi Chisel Chain Combo for ECHO CS-310 Chainsaw (14" Length, 3/8" Pitch, 0.050" Gauge, 52 Drive Links, 7 Sprocket Nose Tooth) 1 Bar 6 Chains.
How many teeth does an 18 inch chainsaw have?
It's an 18" which takes 72 drivers of . 325 . 72 drivers of 3/8" would be a 20" .May 20, 2013
Is it better to have more teeth on a chainsaw?
The thicker links will, more often than not, be heavier, but will also be much stronger. The cutting speed will be much faster with a lighter machine so you will need to be aware of what is required from this job to get it done right.