Property
--------------------------------------------- ----------
Color, Visual Red
Flash Point, Cleveland Open Cup, °C, ASTM D92 200 ( 392)
Kinematic Viscosity @ 100 C, mm2/s, ASTM D445 7.5
Kinematic Viscosity @ 40 C, mm2/s, ASTM D445 34.4
What color fluid is transmission fluid?
dark red
What is Toyota ATF T IV?
ATF TYPE T-IV is a fully synthetic automatic transmission fluid specially engineered to exceed the service fill requirement of all TOYOTA and LEXUS vehicles installed with AISIN WARNER gearboxes, where ATF T-IV fluid is recommended.
What is the difference between ATF WS and ATF T IV?
0 of 3 found this helpful. Do you? Type WS is Toyota's full synthetic blend of ATF for their 2008 and newer cars, which they say does not need to be changed and is good for the entire life of the vehicle. Type-IV is not synthetic so it needs to be replaced every 60k miles.
What does ATF WS stand for?
World Standard
What transmission fluid is compatible with ATF 4?
It is fully compatible with all transmissions that require Mopar ATF +®, Mopar ATF+2™ and Mopar ATF+3™. Valvoline ATF + 4 is for use in all applications specifying Mopar ATF+4 or Type MS-9602 fluid.
Is all ATF 4 full synthetic?
Valvoline™ ATF+4® is a full-synthetic transmission fluid specifically engineered to protect and prolong the life of (FCA) Fiat Chrysler automatic transmissions. It is officially licensed and approved by FCA and is fully back-serviceable and can be used wherever ATF+3, ATF+2 or ATF+ is specified.
What is the difference between ATF and ATF 4?
ATF +4 is a synthetic fluid for finely-tuned transmissions, so if you use a non-synthetic ATF instead of ATF +4 in a car or truck that calls for it, you could damage the transmission. You may use ATF +4 in most applications that call for older Dexron and Mercon fluids.12 Aug 2015
Can you mix ATF and ATF 4?
MaxLife® ATF, ATF +4 and DEXRON® VI are all synthetic transmission fluids. Is it OK to mix synthetic ATF with a conventional and/or synthetic blend ATF? Yes. Synthetic ATF and conventional fluids are 100 percent compatible with each other.
Is ATF 4 the same as Dexron VI?
ATF+4 has specific additives designed for specific Chrysler transmissions. The additives and the make up of the fluid keeps the transmission working properly. If you put the wrong fluid in at best it won't shift right, at worst it will ruin the transmission. Dexron is the same thing only for Chevy vehicles.
Can I use Dexron 3 instead of ATF 4?
Fina's product data sheet for its "Dexron-III/Mercon ATF" says it is recommended for "all late model GMChrysler and most imported carautomatic transmissions, as well as, (sic) those in Ford vehicles that call for a Mercon fluid." But, again, a fluid compatible with Dexron III or Mercon is not going to be
Can I use Dexron 6 instead 4?
DEXRON-VI can be used in any proportion in past model vehicles equipped with an automatic transmission, in place of DEXRON-III (for instance, topping off the fluid in the event of a repair or fluid change). DEXRON-VI is also compatible with any former version of DEXRON for use in automatic transmissions.