Durable high-gloss finish provides a smooth, shiny surface that is easy to clean. Factory-installed, 3-in apron extension for above floor drain (AFD) installation which means no need to cut into the sub-floor or install costly fire protection or pest protection.
Which brand of bathtub is best?
- Aqua Eden Kingston Alcove Bathtub. ...
- American Standard 5-Foot Bathtub (Our Top Pick) ...
- Sinkology Heisenberg Claw-Foot Bathtub. ...
- Kohler Expanse Bathtub. ...
- Vista Copper Euclid Roll-Up Bathtub. ...
- Ove Decors Houston Freestanding Bathtub. ...
- Buchanan Cast Iron Slipper Tub.
What is the smallest size bathtub?
The shortest freestanding tub is a mere 48 inches, or four feet long, and can work well for children's bathrooms or even for adults of average height.
How much space do you need around a bathtub?
While there are no code requirements for tub size, minimum clear floor space alongside a bathtub should be at least 60 inches long (the length of a standard tub) and 30 inches wide. Always allow clear space for access to plumbing and/or whirlpool motors.
How Far From wall is tub?
You will need to cut a hole in the floor at the drain end of the tub to position the tub drain and install it. The hole should be at least 9 inches wide and 12 inches from the wall.
How much space is needed for a bathtub and shower?
Below are common bathroom size layouts. In general, the smallest size is 15 square feet, which can fit a sink and a toilet. For a shower, to be installed, at least 30-36 square feet is required. For a full bath consisting of both a shower and a bathtub, you will need at least 40 square feet.Apr 27, 2020
What does IFS bathtub mean?
The MAAX New Town 6032 (IFS) Acrylic Tub is ideal for any home improvement project. This affordable tub is designed for alcove installation with its integrated apron and tiling flange.
How much room is needed for a tub drain?
The position of the tub drain will vary, depending on the size and design of the tub, and you'll need to cut an access hole in the floor at the drain end of the tub to allow for positioning and installing the drain line. This hole should be 9 inches wide and extend at least 12 inches from the wall.
Can I get a deeper bathtub?
According to the National Kitchen & Bath Association, a standard bathtub is a minimum of 60 inches long and 30 to 32 inches wide. ... Unfortunately, any tub less than 32 inches is usually very shallow as well, making it unsuitable for a deep and relaxing soak.Feb 22, 2021
What is a good bathtub soaking depth?
Standard tub depths allow for approximately 12” of water; soaking tubs should offer at least 14” or more so that the water covers the majority of the bather's body. To determine water depth, measure the tub from the bottom (interior) to the overflow drain.Sep 7, 2017
What is a good sized bathtub?
When shopping for a soaking tub, find a tub that measures between 60 inches long and 72 inches long. Persons over six feet tall may want to consider an oversized bathtub for the most comfort. We recommend shopping for a bathtub that is over 70 inches long.
What is the standard rough in for a tub?
The standard rough-in dimension for a bathtub is 60-¼”. But if there's a gap, you can attach furring strips to the stud wall. You can also apply some cement or plywood. Finally, if the rough-in space is too small, you have to tear the stud wall down or replace the bathtub.Jul 15, 2021