Secondary burn works by burning off the initial smoke produced from the fire that otherwise would have gone up the chimney. You will often see a series of holes towards the top rear of the stove above the fire box that forces fresh oxygen over the chamber, reigniting this smoke.
How do you get secondary burns?
Second-degree burn Burns are tissue damage that results from heat, overexposure to the sun or other radiation, or chemical or electrical contact.
Why does Solo Stove not smoke?
Solo Stove fire pits are designed to be virtually smokeless, but there are a few factors, such as damp wood, ash buildup, and using too much firewood, that can prevent the airflow in your Solo Stove from doing its job to eliminate smoke.
How do you get ashes out of a Solo Stove?
How do you get ashes out of a solo stove? After your fire pit is cool, turn it upside down to empty any remaining ashes left in your stove. You can also use an Ash Vacuum (sold separately). If needed, use a dry cloth to wipe it afterwards.
How does a Solo Stove not smoke?
Air is pushed in through the bottom of the drum and also through the top vent holes to add a bountiful amount of oxygen into the fire. The air at the top of the fire pit creates a “secondary burn” and allows the Solo Stove to get incredibly hot while letting off much less smoke than competing fire pits.
Does Solo Stove produce smoke?
While the solo stove is marketed as a virtually smokeless experience, the truth is that no wood burning fire pit will be completely smokeless. With that said, when properly used, the solo stove should produce such a minimal amount of smoke that it won't be noticeable.
What should I set my Solo Stove on?
Stone, Pavers, or Gravel If you are worried about scorching grass that grows between stones, grab a Stand. However, Solo Stove fire pits are generally safe to burn on stone, pavers, or gravel.
How does solo stove fire pit work?
Solo Stove: How It Works Basically, cool air flows into the stove and is channeled into one of two directions. Some air flows up and into the flames and fuel. Other air is warmed between the double-wall steel before flowing into the top of the flames.Jun 7, 2017
What does secondary combustion mean?
Secondary combustion is the where the gases released from primary combustion of the wood start to burn from 1100 degrees onwards (593 degrees Celsius). This step releases up to 60% of the total heat output from burning wood. [ MSU] During secondary combustion, gases such as carbon dioxide and methane are burnt.
How do I build a secondary burn in my wood stove?
https://www.youtube.com/watch?v=W5rXDKHicPU
What does primary and secondary mean on a log burner?
Primary air is fed to the bed of the fire, while secondary air is directed to the top of the stove for the air wash system.
How do you introduce air to a secondary burn on a wood stove?
You need to open up the primary air control all the way and burn the stove hot for about 20 min, get the chimney good and hot to establish a good draft and then shut the air control down. Then you'll see the "gas jets" coming out of the holes.
What can you burn in Solo Stove?
What kinds of firewood do you recommend? Any firewood logs will work, but we recommend using dry hardwoods in our fire pits to enjoy the best flame. Hardwoods, such as birch, maple, hickory, and oak, will burn longer and cleaner than softwoods.
Will Solo Stove burn grass?
Depending on the hardness of the wood and the duration of the burn, Solo Stove Fire Pits could potentially scorch your grass. Stands should be used with the fire pit at all times when burning on green grass. When taking your fire pit on the beach, you are normally safe to use the fire pit without the stand.