What is a Dado blade used for on a tablesaw?
Have you ever seen pieces of wood that were interlocked?The grooves and inter-lockable patterns are the result of a dado blade.
A dado blade is a circular blade that is designed to cut grooves into wood and help connect pieces together.
There is a lot of confusion about dado blades.If you aren't using a dado blade right now on your woodworking projects, you're missing out.
There are two types of dado blades.You can probably tell from their names that they are different.
Wobble dado blades look like standard table saw blades with a capacity to sway from left to right to create patterns.Discuss each type individually.
There are two outer cutters that look like a table saw blade on the inside of stacked dado blades.If you want to get your desired cutting width, you can either add or remove the chipper blades.
There are a lot of different dado sets.The wider the cut can be, the more chipper blades you have.You only need one or two chipper blades in the middle for a narrow cut.
Dado blades need to be set up in a specific way in order to achieve the cleanest results possible.It can be a bit time consuming if you don't know what you're doing.
The chipper blades need to be offset from the two outer blades.If you are going to use more than one cutter, you will have to set them up in a way that they are offset from each other.There is a
Wobble dado blades use a single blade to create the grooves that you want.They use an offset rotation that helps them get a similar result to a stacked dado blade.
Wobble dado blades are highly variable.You can adjust them by using a screw near the center or by turning the plates at the middle.
They don't like the fact that they round out the edges at the top of a cut.The bottom of the cut is different from the stacked dado blade sets.
Not all table saws are compatible with dado blades.If you want to make dado cuts with your table saw, you need a specialized blade.
Similar to understanding the rip capacity of your table saw, you need to do the same for dado compatibility.
Dado blades can be dangerous if you don't know how to handle them.You should never use a dado blade on a small piece of wood.It can be very dangerous and can end up in smithereens or completely disappear.
You need to understand that dado blades are designed to slash their way through anything they come into contact with, so it is imperative that you learn how to handle them with care so that neither you nor the piece you are working on gets harmed in any way.
If you know how to use the dado blade on your saw, you can make the following cuts.
Dado blades can look intimidating and can be a little hard to work with initially, but they can become convenient assets once you get the hang of how to put them together.Are they dangerous?Not all blades are risky to be around.You will have nothing to worry about if you take your safety precautions seriously.