Electric strikes replace a standard door strike and is connected to a power supply. When an electric strike is activated, it releases the latch, unlocking the door. Electric strike locks remain locked from the outside at all times. When the door closes behind you, it automatically returns to a locked position.
What is an electrified lockset?
Electrified Mortise Locks are simply standard mortise locks equipped with a solenoid that keeps the latchbolt from retracting (usually only from the unsecure side). ... Most electrified mortise locks are ordered as fail-safe. Figure 9.3. Electrified mortise lock. Image courtesy of Security Door Controls.
Do mag locks work without power?
Because mag locks by design require a constant supply of electricity to remain locked, mag locks are fail-safe only — they do not function to keep the door locked from either side when the power is out.Nov 5, 2018
What is a magnetic door lock?
Magnetic locks use electromagnetism to control the entire locking mechanism. When the magnet is energized, it bonds to the armature and locks the door. To allow access or egress, a switch must be provided to de-energize the magnet. As the electric power activates the magnet, the bolt locks the door.
How strong are electromagnetic door locks?
Because the mating area of the electromagnet and armature is relatively large, the force created by the magnetic flux is strong enough to keep the door locked even under stress. Typical single door electromagnetic locks are offered in both 600 lbs. (2669 N) and 1200 lbs. (5338 N) dynamic holding force capacities.
Can an electric strike be used with a deadbolt?
Using an electric strike with an electric strike is not a common application for either a cylindrical or a mortise deadbolt. We usually use a deadbolt to override an access control system so that if the deadbolt is extended, access will not be granted.Dec 3, 2019
How much does an electric strike cost?
Electric strikes come in a number of types for all kinds of applications and will run you anywhere from approximately one hundred dollars for an interior door strike to several thousand for the most secure facilities. For the average door however, the cost is generally about $300.00 installed.
Do magnetic locks work on doors?
Electromagnetic locks consist of an armature and a coil assembly, which become magnetized when an electric current passes through them. This magnetic field secures the door and electronically controls when doors are locked and unlocked. Electromagnetic locks are fail-safe by design.
How do you beat a magnetic door lock?
To beat electromagnetic door locks, cut a 0.015-inch aluminum plate and secure it with adhesive on the strike plate. This would reduce the magnet lock's holding force from over 1,200 pounds to approximately 300 pounds.
Do magnetic locks work without electricity?
Magnetic or “Mag” Locks Mag locks are electromagnetic door locking devices. ... Because mag locks by design require a constant supply of electricity to remain locked, mag locks are fail-safe only — they do not function to keep the door locked from either side when the power is out.Nov 5, 2018
Are mag locks fail-safe?
Maglocks require constant power to stay locked, making them fail-safe. That could lead to an unsecured opening in the event of a power outage. ... They should be used on doors where entry security is a concern since they will remain locked during a power outage.
What is strike side of door?
When discussing door hardware, a "strike" or "door strike," refers to the metal plate or assembly that's installed into or onto a door frame to "catch" the latch or bolt to hold the door closed.