This Hoshizaki 105012-01 baffle serves as a direct replacement for the baffle that came with your B-800 unit. This slanted component is used to keep ice from falling out of your bin when the door is opened, so replacing it aids in keeping your machine free from spills and messes.
What is a bin baffle?
The baffle is attached with a slot tab mechanism located inside the bin so that it does not need any fasteners. The baffle can be removed by rotating the baffle upwards to a horizontal position.. Next, the baffle can be lifted off the tabs. At this time the baffle can be removed through the door opening.Jun 19, 2017
Why is my ice machine making thick ice?
If the ice is too thick or thin after 25-35 minutes, there is likely a problem with the sensor.” ... The sensor may be easily damaged if the screw is set too far in. 2. Troubleshooting Hoshizaki Ice Machines — Moscoso said, “Hoshizaki ice machines are controlled by water flow through a float valve.Mar 15, 2016
Why does my commercial ice machine freeze up?
Industrial ice makers freeze up when ice is unable to release from the evaporator plate. When water flows over stuck-on ice, it begins to grow until it becomes a huge ice block. An ice maker freeze up may prevent the ice machine from producing ice cubes.May 15, 2020
Why is my ice machine beeping three times?
Simply put, when a Hoshizaki ice machine 3-beeps a code, it means your ice maker has had two elongated freeze cycles in a row. ... The freeze cycle is the stage in an ice machine's production cycle where water begins to flow over a cold evaporator plate.Feb 22, 2019
How do I reset my commercial ice maker?
Resetting the power should prevent the ice machine from stopping at the same number of cycles as it did before the repair. Resetting the power twice by pushing and holding down the power button until all lights on the circuit board power on and off. After doing this two separate times, restart the machine.
What does one beep mean on a Hoshizaki ice machine?
Technically-speaking, Single beep alarms are the result of the thermistor reaching 127 degrees Fahrenheit. The most likely causes are: Hot water entering the ice machine. Water not reaching the ice machine.Mar 25, 2020