Seals out most construction dirt and stains, and prevents mortar, plaster and concrete droppings from bonding to concrete surfaces.
How long does it take for poly seal to dry?
24-48 hours
Is there a sealer for concrete?
There are two main types of concrete sealers: film-forming sealers and penetrating sealers. Film-forming sealers include acrylics, epoxies, and urethanes that form a coating on the surface of the concrete. Film-forming sealers, especially acrylics, are more susceptible to wear and will need to be reapplied frequently.
What is Polyseal?
Polyseal is a high solids, high performance concrete curing & sealing compound. This state-of-the-art proprietary formulation completely resists discoloration from ultraviolet light exposure, creating a glossy membrane which remains clear throughout its service life.
How do you apply polyurethane seal?
Using a bristle brush, apply the first coat of polyurethane in long, broad strokes. Keep the application thin, so it goes on evenly and neither pools nor drips. Coat the entire surface. Once finished, wait for the polyurethane to dry.Nov 11, 2020
Do you apply polyurethane with a brush?
Applying Polyurethane. Apply polyurethane using a bristle or foam brush about 2″ wide. Foam works well and eliminates the chore of cleaning, because the brushes are cheap and thus disposable.Feb 10, 2019
Can I use a sponge to apply polyurethane?
After sanding, dust and vacuum the surface and room as thoroughly as possible. Wipe the surface with a damp, lint-free cloth or sponge. If you're going to apply water-based polyurethane, dampen the cloth with water. If using oil-based, dampen with mineral spirits.
Do I have to sand between coats of polyurethane?
Yes. Minwax Polyurethane should be sanded between coats. Sand with 220 grit sandpaper to get rid of any fine particles of dust that have settled on it while it was still wet. Sanding in this case not only allows for a smoother finish, but can also help abrade the surface and increase inter-coat adhesion.Nov 18, 2021
How long does polyurethane take to cure?
It takes a full 30 days for the floors to cure, so it's ideal to wait 30 days before putting area rugs on the surface. If you need to/want to put them on sooner, then 2 weeks is another good benchmark, but 30 days is better.
How soon can you walk on floor after polyurethane?
Fresh polyurethane can be walked on as soon as all signs of wet finish disappear. You may be able to walk on the floor as soon as two hours after applying WBP and eight hours after applying WBP. You should wait two days before moving furniture onto a floor finished with WBP -- four days for OBP.