The recessed, or pit-style dock leveler is the most common type of dock leveler because it has a greater operating range, load range, and life expectancy. The standard range a recessed dock leveler can serve is 12 inches above and 12 inches below dock height.22 Oct 2019
What are the different types of loading docks?
- Flush Dock. The most common loading dock used in transport or heavy lifting, a flush dock allows for the back of the loading truck to be flush against the entryway of a space.
- Open Dock.
- Saw Tooth Dock.
- Enclosed Dock.
What is the purpose of a loading dock?
A loading dock, also called a loading bay, is an area of a warehouse or other building where a truck or other vehicle loads or unloads material. They are typically designed to facilitate efficient interaction with a specific type of vehicle or range of vehicle types.27 Sept 2018
How much does a dock ramp cost?
New and used loading docks are very cost-effective. A new steel yard ramp averages eleven thousand dollars, while buying used typically ranges from six to ten thousand dollars. If you need a ramp for only a short-term or seasonal basis, consider renting a unit from our rental fleet.24 Jan 2022
Can you build a loading dock?
There are many options for constructing a loading dock, which involve proper planning and layout of the loading dock area. Existing buildings often use a sloped pit to lower the truck to provide loading dock height at floor level to the building. Plan the area of the loading dock.26 Sept 2017
What is a portable loading dock?
Portable Loading Docks, Dock Ramp & Platforms A mobile loading dock platform, also known as a portable loading platform or portable loading docks allow lift trucks to easily make right-angle turns.
How much space is needed for a loading dock?
Each truck bay should be at least 12 ft wide to provide enough space for the trailers, which are 8'0″ to 8'6″ wide, to back squarely to the dock. To reduce congestion, design 14 ft wide bays. If swinging trailer doors will be opening or closing at the dock, the center distance should be at least 14 ft (Figure 32).
How long should a loading dock be?
Contact the Loading Dock Equipment Experts at ABC Docks Today. Typical loading dock heights range from 48 to 52 in, but, depending on the needs of the facility, they may be as high as 55 inches.7 Apr 2021
How big should a loading area be?
SET THE LOADING BAY WIDTHS Each truck bay should be at least 12 ft wide to provide enough space for the trailers, which are 8'0″ to 8'6″ wide, to back squarely to the dock. To reduce congestion, design 14 ft wide bays.
How far apart should loading dock doors be?
12 ft apart
How wide should a loading bay be?
SET THE LOADING BAY WIDTHS Each truck bay should be at least 12 ft wide to provide enough space for the trailers, which are 8'0″ to 8'6″ wide, to back squarely to the dock. If swinging trailer doors will be opening or closing at the dock, the center distance should be at least 14 ft (Figure 32).
What are some features of a loading dock?
- Leveler Plate. A leveler plate is a piece of equipment located inside of the building.
- Overhead Door.
- Loading Dock Shelters and Seals.
- Dock Bumpers.
- Loading Dock Lighting.
- Loading Dock Trailer Restraints.
- Interlocking Loading Dock System.
- Loading Dock Access Points.
What is a recessed loading dock?
A loading dock is a recessed bay in a building, where trucks are loaded and unloaded. Commonly found at manufacturing plants, warehouses and other industrial buildings. They are the primary location of the movement of product, coming in and out of a facility.27 Mar 2013