ADA Ramp Specifications Ramps must be a minimum of 36 inches wide. Some areas require wider ramps. All edges must be protected to keep anyone from slipping off. All ramps shall have top and bottom landings as wide as the ramp itself and at least 60 inches long.Oct 26, 2020
What is the maximum slope of a ADA ramp?
1:12
What is the code for a wheelchair ramp?
The ADA requires that all business and public use wheelchair ramps adhere to a 1:12 slope ratio, meaning that for every inch of vertical rise there must be 12 horizontal inches (one foot) of ramp.
What is the maximum rise for a ramp?
If the slope of a ramp is between 1:12 and 1:16, the maximum rise shall be 30 inches (760 mm) and the maximum horizontal run shall be 30 feet (9 m). If the slope of the ramp is between 1:16 and 1:20, the maximum rise shall be 30 inches (760 mm) and the maximum horizontal run shall be 40 feet (12 m).
What is the minimum slope allowed for a ramp?
Slope is the ratio of the height of a ramp to its length. An ADA curb ramp must have no more than a 1:12 ratio, or no greater than a 8.33% slope. The ADA also requires slopes to be consistent from end to end; a ramp must have a uniform slope.Mar 10, 2021
What is the maximum allowable slope for a ramp?
the U.S. per the US ADA (Americans with Disabilities Act), a ramp is a sloping route constructed with a slope greater than 1:20 (one inch of vertical rise for every 20 inches of horizontal length, or run) and must conform to the standard ADA specifications for ramps. Ramps may have a maximum slope of 1:12.
What is the slope of an ADA ramp?
1:12
What section of ADA covers ramps?
Section §405
What is code for wheelchair ramp slope?
1:12
What is the maximum slope for a ramp?
The least possible slope should be used whenever possible. The maximum allowable slope in any new construction is 1:12 with a maximum rise of 30” (76.2 cm) without a landing. A ramp with a slope between 1:12 and 1:16 can have a maximum horizontal length of 30' (9.14 m) without a landing.