What is the best lubricant for drilling stainless steel?
What is the best lubricant for drilling stainless steel?
Ideally, you want to use cutting oil, although motor oil or even WD-40 will do the trick. I even used olive oil once. The key is to stop often for cooling and to make sure there is plenty of oil.May 16, 2017
What is stainless steel cutting Lube?
Stainless steel cutting lubricant STAINLESSCUT™ is a heavy-duty cutting lubricant designed for tough metal cutting operations. Formulated for stainless steel, alloys, and ferrous alloys.
Do you need lubricant when drilling metal?
Drill at a slow speed. Use plenty of lubricant. ... If you are unsure of the metal you are drilling then a cobalt drill bit would be the best option.
What liquid is used for drilling metal?
WD-40 and 3-In-One Oil work well on various metals. The latter has a citronella odor; if the odor offends, mineral oil and general-purpose lubricating oils work about the same. Way oil (the oil made for machine tool ways) works as a cutting oil.
Can you use vegetable oil for drilling metal?
They are used to provide lubrication and cooling effects between cutting tool and work piece and cutting tool and chip during machining operation. ... In the present work, different non-edible vegetable oils are used as cutting fluid during drilling of Mild steel work piece.
Should you not be lubricated when drilling?
Lubrication is important, because, without it, the chip sticks to the tool, jamming its channels, what can cause drill breakage. To perform the drilling with a high volume of chip per time, like when vc = 450 m/min and drill diameter D = 20 mm were used, a high level of lubrication must be present.