How do I know if I need a 10 or 12 rough in toilet?
To measure the rough-in for your toilet, measure from the wall behind to the toilet to the middle of the closet bolt caps on your current toilet. ... If your toilet has four bolts rather than the standard two, you'll measure to the center of the rear bolts. The standard rough-in measurements are 10, 12 and 14 inches.Jan 5, 2018
What is the difference between a 10-inch and 12-inch rough in toilet?
When a toilet with a 10-inch rough-in is placed in a 12-inch rough-in space there will be 2 inches of open space between the tank and wall. ... However, the extra inches will cause the tank to be further away from the shutoff valve on the wall, so a longer connector may be needed to reach effectively.
Can you replace a 10-inch rough in toilet with a 12-inch?
The rough-in for your bathroom plumbing should match the rough-in for the toilet. Even if a toilet is designed for a 10-inch rough-in, you can still install it in a space with a 12-inch rough-in.
How do I know if I need a 10 or 12 rough-in toilet?
Take the cover off of the toilet tank, and lay the toilet on its side to access the underside of the base. Measure from the back edge of the base to the center of the closet hole, or drain hole. Note if the measurement is 10 inches or 12 inches.
What is the difference between a 12 and 14 rough-in toilet?
While 12-inch rough-ins are more generally common than 14-inch rough-ins, they both have their merits, and sometimes you need to reduce the space taken up behind the tank, which is where a 14-inch rough-in comes in handy. ... So if you're looking to install 14-inch rough-in toilets, then you've come to the right place.
What is code for toilet rough-in?
In general, the toilet rough-in distance is 12″ from the center of the toilet flange to the back wall for a typical toilet. There should also be a minimum of 15″ from the centerline of the toilet to any wall or object on either side of the toilet.Feb 10, 2021
What is the standard opening for a toilet?
The standard distance from the back wall is 12 inches, or 12-1/2 inches from the center of the flange to the wall framing. Minimum distance in front of the toilet to the facing wall or fixture is 21 inches.
Does a 10-inch rough in toilet save space?
But if space is really that critical, a 10-inch rough-in model may be a viable solution to consider. This will position the toilet further back against the wall saving you some depth for more spaces at the front. However, not all 10″ rough-in toilets are meant for saving space.