What setting should my Bradford White water heater be set at?
What setting should my Bradford White water heater be set at?
Turning the screwdriver clockwise will increase the temperature of the water that the heater will produce. Turning it counterclockwise will decrease the temperature. The lowest setting is the factory setting of 120 degrees. The highest will increase the temperature to above 160 degrees.
What temperature is B setting on water heater?
130 degrees
What does ABC mean on water heater?
Now, some water heater temperature controls come with settings that read “A-B-C” as opposed to numbers. Generally, A means 120 degrees, B means 130 degrees, and C means 140 degrees.
How do I turn up my Bradford White water heater?
Place the screwdriver into the center of the temperature dial. Turning the screwdriver clockwise will increase the temperature of the water that the heater will produce. Turning it counterclockwise will decrease the temperature. The lowest setting is the factory setting of 120 degrees.
What setting is 120 on water heater?
120 degrees Fahrenheit is the safety recommendation against scalding, but 140° is the common default setting. Most experts agree that anything below 120 degrees creates a risk for bacteria to develop inside your water heater from stagnant water, such as legionella that causes Legionnaire's disease.
How do I know what temperature my water heater is set at?
You can find your current temperature setting by looking at the dial on the water heater (if equipped) or taking a temperature reading from the faucet. Turn on the hot water tap and allow it to run for a few minutes before taking the temperature.Apr 19, 2018
How do you reset the thermostat on a Bradford White water heater?
a) Depress the high limit “Reset” red button (with power on). If button snaps back out, the temperature of the water is higher than the cut out setting of the limit switch. Allow water temperature to drop. The limit can be reset at 120°F or below.
Can water heater temp be adjusted?
Gas or electric water heaters Find the access panel for the thermostat(s) and use a screwdriver to remove the panel. ... Use a flathead screwdriver to adjust the thermostat up or down. If your water heater has two thermostats, adjust both the same amount. The top thermostat should be a few degrees higher than the bottom.Jul 18, 2018