What should an oil tank sit on?

What should an oil tank sit on?

A poured concrete basement floor provides the best option for a strong, stable and solid base for the tank. There should be no odors from a properly installed inside tank.

How do I protect my outside oil tank?

Cover your heating oil tank — Build a shed around your heating oil tank to insulate it against the elements. Bury your fuel line — If you have an aboveground heating oil line, consider burying it. The ground will naturally insulate the lines. Install a wider fuel line — A wider fuel line can minimize gel blockages.

How thick should concrete base be for oil tank?

For a 3 1/3-inch-thick slab, measure up this distance from the pad at the corner stakes at the low side, and mark each stake. Alternatively, mark the stakes 5 1/2 inches from the surface of the pad for a thicker slab.

Does oil tank need to be higher than boiler?

Raising the tank so that the bottom outlet is higher than the boiler inlet will allow gravity to feed the fuel directly to the boiler. If located at ground level, a bunded plastic tank will require an internal flexible suction pipe to draw the fuel oil up to a top outlet, which is factory fitted within the outer bund.

Can oil tanks be underground?

Many underground home heating oil tanks are similar to the 275-gallon steel tanks you have probably seen in basements or garages. These tanks were not designed to be buried and, if left in place, will eventually corrode and leak. And if your tank does leak, you may face a costly cleanup.

What are the regulations for siting an oil tank?

Tanks shall be installed on the lowest floor of the dwelling. Inside tank(s) shall be located not less than 5 feet (1.5 m) from any fuel-fired equipment. The tank shall be placed in an area where it is unlikely to be adversely affected by normal household activities.

Can I cover my oil tank?

An above ground oil tank cover will keep the tank safe, particularly during fall and winter. You may also want to consider getting an oil tank blanket. This helps to keep the device warm and free from rust or corrosion. The cover can also conserve energy.