32mm - for hand basin waste pipe. 40mm - for sink and bath waste pipe. 110mm - for soil pipe and main drains.
Can you use 32mm waste for kitchen sink?
32mm is generally used for hand basins and low volume outlets and 40mm used for showers, baths and sinks. Solvent Weld or Push Fit? They will never leak and you can blow them as hard as you like with any type of pipe unblocking equipment and the welded joint will never move.
What size are bath drains?
With a bathtub, the drain will be 1.5 inches in diameter. The drains for sinks can vary slightly, but the most common measurement for those is 1.25 inches. You might also find sinks with a drain diameter of 1.625 inches.23 Dec 2021
What is the usual size for wastewater drain pipes?
A 3-inch pipe is what's used in homes to pipe toilets. The 4-inch pipe is used as the building drain under floors or in crawlspaces to transport all the wastewater from a home out to the septic tank or sewer. The 4-inch pipe may also be used in a home if it's capturing two or more bathrooms.10 Jun 2019
Are bath wastes standard size?
The bath waste will be 1.5", wash basin waste's are 1.25". Make sure you buy the right size traps and waste grate. Bottle traps are not normally fitted to bath's, but you can get 1.5" bottle traps that fit kitchen sinks. I think you must have bought a wash basin trap which will be 1.25".24 Aug 2008
What size thread is a bath waste?
BSP Size Diameter of the thread (mm) Typical products you might find
-------- --------------------------- ----------------------------------------------------
3/4" 26.4 Bath tap rigid tails, valves that fit into bath taps
1" 33.2
1.25" 41.9 Basin wastes
1.5" 47.8 Bath & sink wastes
Are bath and basin wastes the same size?
First and foremost wastes are all the same size 1 1/4″ or 32mm. Sometimes people get confused and ask why is there 2 sizes of basin wastes? the simple answer is that they are 1¼” BSP (32mm) and bath/sink wastes are 1½” BSP (40mm).
Are all bath wastes the same size?
Bathtubs come in a variety of shapes, materials and volumes. However, they all have so-called "standard" sizes in terms of drainage, the position of the overflow and the length of the sealing system. overflow pipe length = from 54 to 130 cm; waste trap with trap seal greater than or equal to 50 mm.
What is the size of waste fitting in a bathtub?
The Drain Hole The standard tub drain plug size is 1 ½” diameter. The drain size may be subject to local plumbing codes. The tub drain connects to the p-trap, or drain elbow, and should be large enough and unobstructed to allow the water to flow freely when opened.