You can find the reset button at the bottom of the ice maker. Remove the ice tray to locate it. Remove the ice tray. The red button you see is the reset button.
How do I force my ice maker to cycle?
https://www.youtube.com/watch?v=Nz4w2KRyXec
What causes a ice maker to stop working?
Cause: A common cause for a clog is frozen water in the line. ... Cause: There is also a possibility that the water filter for the ice maker is clogged. Fix: Locate and replace the water filter. Filters for ice makers are typically located inside the refrigerator (to keep them from freezing).24 mar 2016
How do I force my Frigidaire ice maker to cycle?
- Open the freezer door to remove the ice bin from below the ice maker.
- Empty the ice from the bin. ...
- Press the ice maker toggle switch to the "On" setting if it is not already activated.
- Pop off the front cover of the ice maker with the tip of a flat-blade screwdriver.
How do I reset my ice maker?
Unplug the refrigerator for 30 seconds; then plug it back in. Within 15 seconds of restoring power, press the feeler arm three times in succession. This should force the ice maker to run water into the reservoir and begin the cycle of ice production.
How do you troubleshoot an ice maker?
- Check the shutoff arm.
- Check the supply valve.
- Inspect the water supply line.
- Test the shutoff switch.
- Check the freezer temperature.
- Inspect the ejector gear.
- Test the ejector motor.
- Test the ice mold heater.
Why is there no water going into my ice maker?
Water may not be reaching the ice maker due to a frozen line, missing filter, or a closed supply valve. ... When there is no filter, or it is clogged, the ice maker does not get water. Make sure that the filter is in place, and if it has not been changed in more than six months, replace it with a new one.
Why does my ice maker not dispense ice?
One of the most common – and innocent – causes of an ice maker that won't dispense ice is that an ice clump has formed inside. In order to drop the ice cubes from the mold, heat is released to lightly melt them. ... Sometimes you may need to remove the entire bin or even defrost the ice maker.10 feb 2020