The (clear) fuel intake line runs from the top of the carburetor (straight nipple) and goes to the short post on the back of the primer bulb. The return line (blue) comes from the long post on the back of the primer bulb and goes into the bottom of the fuel tank.
How do you put the line on a Ryobi weed eater?
https://www.youtube.com/watch?v=m85o7Y0Ytl8
Why are there 2 fuel lines weed eater?
The supply lines need to connect to the fuel tank so that, when the weed eater is held in the operating position, they are below the fuel level. The vent and return lines will typically attach higher up. The lower line on the carburetor should be the supply line, the upper one would be above fuel to vent air.Apr 22, 2008
Which fuel line is the return line?
https://www.youtube.com/watch?v=k3qi6Xn6hqA
Which fuel line goes to the primer bulb?
The (clear) main fuel line with the filter (filter inside the fuel tank) goes to the bottom of the carburetor (or the elbow shaped nipple). The (clear) fuel intake line runs from the top of the carburetor (straight nipple) and goes to the short post on the back of the primer bulb.
What fuel do weed eaters use?
All Weed Eater brand two-cycletwo-cycleOn 31 December 1879, German inventor Karl Benz produced a two-stroke gas engine, for which he received a patent in 1880 in Germany. The first truly practical two-stroke engine is attributed to Yorkshireman Alfred Angas Scott, who started producing twin-cylinder water-cooled motorcycles in 1908.https://en.wikipedia.org › wiki › Two-stroke_engineTwo-stroke engine - Wikipedia gas trimmers use a 40:1 ratio of gas to oil. That's equal to 3.2 ounces of oil to 1 gallon of regular gas. The gas should be 87 octane with no more than 10 percent alcohol. The oil must be formulated for two-cycle engines.
How does the primer work on a weed eater?
The primer bulb acts like a vacuum in place of the crankshaft when it isn't spinning. It pushes air out of the fuel lines and sucks gas into the carburetor. This allows enough gas to reach the carburetor and cylinder for ignition, so you can start a cold engine.
How does a weed eater spin?
The generic name for a Weed Eater is a string trimmer, and several manufactures sell models with electric, gasoline and battery-powered engines. String trimmers are lightweight tools, and they work by using rapidly spinning microfilament string that becomes stiff enough to cut grass and weeds.
Does the Weed Eater brand still exist?
“The Weed King,” as Ballas came to be known, eventually went on to sell Weed Eater to Emerson Electric Co., which later merged with Poulan, and was acquired by the Husqvarna Group in 1986. Today, the Weed Eater brand encompasses not only string trimmers, but also mowers, hedge trimmers, and blowers.
Where do they sell weed eater brand?
Weed Eater - Walmart.com.
Does Honda make a weed eater?
Honda designed its weed eaters to deliver an exceptional performance for all the types of grass and weeds, so even if you have a thicker type of grass, these weed eaters will do wonders for your lawn.Apr 12, 2021