Most state and local codes prohibit the use of a saddle valve, also known as a piercing saddle valve, saddle tap or needle valve, consisting of a clamp that punctures a hole in an existing water intake pipe. ... Saddle valves tend to reduce water flow, causing them to become clogged and leak.
Can you tap into PEX water line?
First you need to cut the PEX tubing at the access spot. That can be done with a PEX tubing cutter. Then you acquire the correct type fitting (your size requirement may differ from picture) to rejoin the cut PEX with "T" fitting and a branch connection for an added PEX tubing to go off toward the ice maker.Jan 24, 2015
Are saddle valves up to code?
Most state and local codes prohibit the use of a saddle valve, also known as a piercing saddle valve, saddle tap or needle valve, consisting of a clamp that punctures a hole in an existing water intake pipe. It is a shortcut used instead of installing a more permanent and secure connection.
Are saddle valves good?
Because saddle valves are not permanently attached, they are prone to leaks and can potentially cause extensive property damage when they ultimately leak. Saddle valves tend to reduce water flow, causing them to become clogged and leak. Extensive property damage could result from these leaks.
Can saddle valves be used on PEX?
Most saddle valves are designed to work with standard rigid copper pipes—they are not recommended for PVC, CPVC, or PEX plastic pipe. They are also designed for water systems with a maximum pressure of no more than 125 psi.Sep 2, 2021
How do you attach saddle valve to tubing?
https://www.youtube.com/watch?v=cYCGDhnfxZ8
How do you use a saddle valve?
Saddle valves are self-tapping devices. Once mounted on a line, with the included rubber seal in place, all that is required is to turn the valve clockwise until it pierces the water line. When the valve handle can no longer be turned, it is done tapping the pipe. Turning the handle counter-clockwise opens the valve.
Why you should never use a saddle valve?
https://www.youtube.com/watch?v=0lLW2sJLa0I
Can you put shut off valves on PEX?
Solder a copper-to-PEX transition fitting onto the end of the stub-out that faces down, then let the pipe cool. Run a 1/2-inch PEX water pipe to the fitting and connect it by pushing the tubing over the barbed end of the fitting. ... You can then solder on a valve with a slip connection or install a compression valve.
What is a saddle valve on a water line?
A saddle valve is a valve used to supply liquid where a low volume, low pressure stream is required. The name is derived from the fact that it is mounted in such a way that it "saddles" the line, mounting it from both sides. They are typically used for supplying cold water, via a 3/8 inch tube, to: humidifiers and.