Why do some trucks skip weigh stations?

Why do some trucks skip weigh stations?

“The weights are screened before they get to the scale, and if they're in compliance, a green light comes on in their vehicle and they can bypass the scale. It's an overhead scanner in conjunction with a weigh-in-motion device.”21 sept 2014

What happens if you don't stop at a scale?

For example, if a trucker skips a required weigh station, they could be pulled over by a law enforcement officer, who may direct the trucker to drive back to the weigh station. ... And that can lead to additional delays because even more of your trucks could be required to stop at weigh stations on the future.29 mar 2018

How much is a ticket for not stopping at a scale in California?

Statute Ticket Total BFCD ------- ---------------------------------------- ---------- 304.325 Failure to stop at weight scales $189.00 307.010 Failure to secure load $189.00 307.400 Failure to equip to assure no load shift $189.00 307.400 Seat belt violation $89.00

Do weigh stations have cameras?

Permanent cameras are fixed on both sides of a lane approaching a weigh station. Photos are taken of both the right and left side of the vehicle, and the images are sent immediately to personnel.12 mar 2019

Why are there cops at weigh stations?

Because big rigs are required by law to stop and be weighed (if the weigh station is open). This is to make sure that the truck isn't overloaded past its capabilities and so that it doesn't damage bridges and roadways.

Why are there so many weigh stations?

A weigh station is a designated location, typically located directly off of highways, where the Department of Transportation or state highway patrol inspects the weight of a vehicle. The reason why there are weigh stations is to ensure that the roads are not compromised by a potentially overweight vehicle.17 ene 2017

Can truckers avoid weigh stations?

If a weigh station is located on your current route, you'll need to make adjustments so that you can avoid it. You can either change your route ahead of time by looking at a map, or you can exit the highway before you reach the weigh station and take an alternate route then.

Related Posts:

  1. Why do some trucks stop at weigh stations and some don t?
  2. Why do some trucks not go through the weigh station?
  3. Joists, Rafters, and Ceiling Joist Tables are available for use in the South.
  4. How do trucks know when to stop at weigh stations?