Why does my Dyson vacuum cleaner stop working? How to fix Dyson V6 that keeps stopping and starting.
The audience supports Trusted Reviews.We may earn a commission if you purchase through links on our site.
As powerful as Dyson vacuum cleaners are, they can occasionally run into problems.One of the most common issues with the Dyson V10 is that it doesn't give you a continuous stream of suction.
We will show you how to diagnose and fix Dyson vacuum cleaner problems if they keep stopping and starting.The basic information for corded and cordless models is the same.
Make sure your vacuum is fully charged before you use it.Dysons are small and powerful, but they need to be charged frequently.
The vacuum's battery needs to be charged.Depending on the model, flashing lights may point to a problem.Before you try to turn on the vacuum, make sure you unplugged it from the power outlet.
The battery life of any electronic appliance is likely to degrade over time.Depending on your model and pattern of usage, how fast this happens will be determined.You may need to replace the battery if it is no longer charging or lasts less than a few minutes.
The Dyson DC35 that I had from around 2012 wouldn't run for longer than 20 seconds even though it had received a lot of charge.The issue was fixed by a new battery pack.
When your Dyson vacuum cleaner starts and stops, it's a good idea to empty the bin.The machine may think it's too full to continue working.A full bin can stop the Dyson vacuum cleaners from working.
There should be no dirt in the top part of the bin.You can either give it a knock or use a thin blunt object to get rid of the bits.It is worth checking for obstructions in the stick, wand, and hose for cylinder and upright models.Make sure your machine is not plugged in.
The motorheads can have problems with tangled hair, which is one of the blockable culprits.
Sometimes it is necessary to open the cleaner head.This can be done by using a coin on my Dyson V8 Animal.
If you haven't cleaned your filters in a while, it may be worth it.
Dust can make its way into the motor if it escapes from the filters.It makes sense that filters can block the flow of air when they are full of dust.Your cleaner will be rejuvenated by cleaning a filter.
How often you clean your filters depends on how frequently you use your vacuum.Dyson says that filters should be cleaned every month.I live in a small flat with wooden floors and a few small rugs, so I clean the filters of my V8 Animal every couple of months.
Remove the vacuum from the power supply.Refer to your vacuum's instruction manual if you have a problem finding the filters.If you don't have your own manual, it's easy to find it on the internet.
Depending on the model, your vacuum may have one or more filters that need to be cleaned.The post-filters in Dyson models help to prevent allergens from entering your home.
My V8 Animal and Dyson V7 Trigger both have pre- and post-filters.The Dyson V10 models only have one filter and a light that tells you when to wash it and when the filter needs to be replaced.
Dyson's vacuums tend to have a long, narrow pre-filter on top of the bin.Pull it straight up.The post-filter is located at the back of the vacuum and can be removed by twisting it clockwise.
The Dyson vacuum cleaners have filters that sit above the bin or inside the ball part.
The filters are usually purple.Pre- and post-filters are usually shaped like cones with a plastic circle on top.
The filters may look clean if you haven't washed them in a while.Once you begin rinsing it, you will see that a lot of the dirt and dust is hiding inside the filter.
Dyson says to wash the filters in cold water until they run clear.If you don't want to damage the pleats in the post-filter, you can simply rinse it out.
The filters need to be dry in 24 hours.Dyson doesn't advise you to put the filters in the tumble dryer or the oven, but anywhere slightly higher than room temperature will do nicely.
It's possible that you don't need the full 24 hours.If you put the filters back in the machine, you may be left with an unpleasant smell.
If you smell strongly even after washing and drying your filter, you may need a new one.Make sure the filters are fitted back in correctly when you replace them.
Buying spare filters and exchanging them frequently can be a good technique, as your vacuum cleaner is always ready to go and you don't have to wait for one set of filters to dry.
It is wise to contact the manufacturer of your Dyson if it continues to start and stop after cleaning the filters and replacing them correctly.
Editorial independence means being able to give an impartial opinion about a product or company.Every member of the editorial staff follows a clear code of conduct.
Journalists are expected to follow ethical standards in their work.Our staff members are expected to be honest and accurate.The editors code of practice underpins the standards.
Trusted Reviews gives its readers thorough, unbiased and independent advice on what to buy.