Why does my Kuerig coffee maker say I need to add water.
What does it mean when my machine tells me to add more water but it's not full?Coffee lovers can make a great investment by buying a coffee maker like the Keurig.
The value of a coffee lover's home Keurig is priceless.It's frightening to see funny errors on your coffee machine.
When your machine keeps telling you to add water even though it is full, is one of the more common errors.
If your machine says to add water but it's not enough, you can fix it by gently tapping on the side of the machine until the sensor light goes off.The problem can be caused by the obstruction in how your Keurig senses water levels.
The water level in the machine can be low if the float magnet gets jammed or blocks the system.
The disc has to be able to send signals to the sensor in the machine.
When there are stains on the reflective disk, it can no longer be detected by the photosensor.
To fix the problem, you have to use a shiny object that can be pushed up to the sensor or photocell.
The water level should be told by this.To permanently solve the problem you might want to rinse with clean water or take the risk of scrubbing out the reflective disk and make it shiny again.You can get help from a technical help if you don't want to take that risk.
You might have a problem with your machine constantly pumping water.This can be a big waste to your K-cups.
The problem is usually caused by faulty valves.Some particles may be caught up by some visible valve points if you are lucky.When your valves are permanently damaged is the worst-case scenario.
Simply remove the stuck debris from the machine.Don't wait for it to cool down, dismantle the needle section and clean it out with the appropriate tools.
If you don't have actual tools, you can use a small pin or paper clip.Use the instructions in the manual to clean and descale the machine.
The easiest way to solve most technical problems is to turn the device on and off.If you want to reset the brewer, this may not be as easy as you think.
There are two ways to reset your Keurig, one of which applies to most home Keurigs.
You need to turn it off before you can reset it.You need to take the water out of the main unit and then switch on the unit without a water tank.
Reattach the tank and you will be able to reset it.The second way to reset your Keurig may be different.
You need to press the small and medium buttons at the same time.Release them and then press the menu button three times.
The clock should have some digits on it after you do that.The display will show youBrew 0:00 if you press the menu.Press and release the menu button when holding down the medium mug button.
Press the small mug button if you keep holding down the medium button.You would have reset your machine if you unplugged and plugged it in multiple times.
You might have a problem with your machine constantly pumping water.This can be a big waste to your K-cups.The problem is usually caused by faulty valves.Some particles may be caught up by some visible valve points if you are lucky.
When your valves are permanently damaged is the worst-case scenario.Simply remove the stuck debris from the machine.
Before you disassemble the needle section and clean it out with the appropriate tools, make sure to connect your Keurig and wait for it to cool down.
If you don't have actual tools, you can use a small pin or paper clip.Use the instructions in the manual to clean and descale the machine.
The good news is that most problems can be fixed by resetting the machine.The majority of the problems are rather technical and can be fixed with a shake and plug.