Your pump alarm will sound when the water in your sump container rises to 6” below the lid. This usually means your pump is not working because a) it is not receiving any or enough power or b) your pump is old, has worn out, and needs to be replaced. ... As the rain subsides the water in your container will recede.
Why is the alarm going off on my sump pump?
Sometimes, the sump pump alarm may go off simply because the pump is working hard to drain the water during high-peak usage (if it's raining, for example). Otherwise, you may want to call a plumber to the scene to make sure that the pump can keep up with demand, and avoid a flooded basement.Sep 18, 2019
How do I turn off my basement watchdog battery alarm?
To permanently disable the water fluid low alarm, attached the fluid sensor rod to the positive terminal of the battery. This can be done by tightening down the wing nut on top of the positive terminal and the fluid sensor.
How do I stop my sump pump from beeping?
If you just had a power outage and your backup sump pump was running, the alarm may go off temporarily until power is restored and it can recharge. If this is the case, some battery backup systems have a button to reset the alarm for 24 hours.Jul 15, 2021
How do I know if my battery backup sump pump is working?
How Do I Test My Backup Sump Pump? A battery backup sump pump should be tested in the same way as your regular pump. With the primary sump pump unplugged, run through steps 2 and 3 from above and make sure the pump drains the water and shuts off. During the testing process, keep an eye on the battery indicator light.May 21, 2019
How do I stop my basement watchdog from beeping?
If you Basement Watchdog battery alarm won't stop first make sure that there is nothing wrong with your pump system and there is no risk of a flood. After that check the power connection for the pump and battery back up as well as fill the unit to make sure it is not overheating or too cold air and at risk of freezing.