NO. The lid lock it to prevent injury to the people near the washer, as without it stopping the machine, the agitator will turn with the lid open. So. If you will open the top up, you should see the lid switch, and you should see the electric wires attached to it.
Where is the lid switch on a Roper washing machine?
Lift the lid of the washer to release the old lid switch. I removed the two screws on the back of the control panel. The control panel then flips back. The switch is on the left side.
How do you remove the lid switch on a Roper washing machine?
You will need to access the back of the washer, and remove the two Phillips screws that hold the top back panel in place. Slide the panel forward to release. Use your nut driver to loosen the screw that holds the ground wire in place. Lift the lid of the washer to release the old lid switch.
Can you bypass the lid switch on a Roper washing machine?
This switch performs the same function, but the lid must be locked in place for the machine to wash. A simple bypass for the first type of lid switch is to simply jam a piece of wood into the switch, causing it to activate the solenoid.
How do I know if my washing machine lid switch is bad?
Signs The Lid Switch Is Bad If the control panel doesn't detect the switch as being engaged, then the washer won't agitate or spin when you close the lid. Your washer may or may not fill with water when you have a bad lid switch depending on the model you have.
Where is the lid switch assembly?
https://www.youtube.com/watch?v=pbQU-NlkHcw
How do you replace a lid switch?
https://www.youtube.com/watch?v=MFsvLiuTniU
How do you take the top off a roper washing machine?
Unplug the electrical cord of the Roper washing machine from the electrical outlet, before attempting to take apart the washer. Detach the end caps from the washer by pressing in on the center of the caps with your thumbs. Pull them forward to remove the caps from the control console.
How do you test a washing machine lid switch?
https://www.youtube.com/watch?v=n1G6h0EOlbs
Can I bypass the lid switch on my washer?
Most washing machines come equipped with a lid switch. This switch performs the same function, but the lid must be locked in place for the machine to wash. A simple bypass for the first type of lid switch is to simply jam a piece of wood into the switch, causing it to activate the solenoid.
How do you fix the lid switch on a washing machine?