You can buy barrel lock pick on eBay.
Picking a barrel lock is basically the same as picking a pin tumbler lock.To understand how to pick a barrel lock with its lock pick, you have to know how the key works.The pins are arranged radially instead of linearly, which is the same technology as a pin tumbler lock.The plug is in front of the shaft, which is the same as with a pin tumbler lock.The interface between the two is still the shear point.
They have a high amount of security for their price.They come in 7 or 8 pin varieties.They are almost impossible to pick without a special type of pick.This is the place where anyone looking for advice on using vending machine lock pick can find it.These locks can be found on vending machines, ATMs, computers, and expensive bike locks.
I assume that anyone who claims they can pick these using a conventional tension wrench and pick is either lying or really lucky.If you have an 8-pin pick, the 7-pin tubular lock pick is redundant and useless since you can not use the eighth pin.
It is unlikely that you can push the pins in one at a time while applying tension, and have them stay there while you remove the pick, because tubular locks seem to be more resistant to wear from overuse.When rotating 1/7 for a 7-pin or 8pin of the way around, the pins fall back into place.You have to pick the lock 8 times to open it.
You can not pick one at a time.You can get a tubular lock pick.These are easy to use.Push the shims out as far as you can.This is the maximum distance that any pin will need to be pushed in to get to its shear point.Just like a key, insert the pick into the lock.Slowly turn it both ways and wiggle it around so that the pins are being pushed against them.The lock should open if you slowly pull the pick out.It doesn't take a lot of tension to open it.If you don't move the shims on the pick, you have a working key for that lock.
It's easy to pick the same lock with a measuring device.If you do manage to get a tubular lock open, don't move the shims from their position.Write the distance that you moved down on the measuring device.Next time you want to pick it, take the measuring device with you and set it to the same as before.The tool is great for tubular lock picking.