Have you ever wondered what it looks like?While the naked eye can't see the light, you can use a few different tools to view it.You can use a remote control to look through a camera, but you can also make your own goggles by yourself.Before you know it, you'll be able to see it on your own.
Step 1: The materials should be used to detect the light in the home.
A device that records video and a remote control can be used to detect the light.You can use a phone, camera, and video recorder according to your preferences.There is a small light bulb at the top of the remote control that emits light when you press a button.The easiest way to detect the light is with a phone.
Step 2: Make sure your remote control works.
You will need a remote control to work.Press a button to make sure the remote control responds correctly.Change the batteries or use a different remote control if it doesn't work.If you don't know if your remote control works or not, you should replace the batteries first.
Step 3: Press the button on the remote control.
If your remote control is on and working, the specific button doesn't matter.Even if you're in a different room, your remote control will still light up when you press the buttons.
Step 4: The remote control should focus on the top light bulb.
Press any button on the remote control if you want to look at the light bulb through the camera.The small flash of light you see is a signal from your remote control.If you don't see a small flash of light, check your remote control's batteries or try again, as it may be broken.
Step 5: You can use welding goggles to make goggles that are more visible.
It's possible to see more of the visible light spectrum with the help of goggles.The base of your goggles can be purchased from a home improvement store or online.Before purchasing welding goggles, make sure the lens is removed.
Step 6: Purchase 2 sheets of stage lighting.
Stage lighting gels block out most visible light so you can see more.Stage lighting gels can be purchased from most theater supply stores.The amount of stage lighting gel sheets depends on the size of the welding lens.You can always buy more if you run out.
Step 7: The original welding goggles need to be removed.
Depending on the goggles, you can either pop them out or remove them.If you can't remove the lens, contact the manufacturer for instructions.It may not be possible for some models.You'll need the original lenses as a pattern for the homemade ones, so don't throw them away.
Step 8: The original lens should be used as a guide when cutting 8 lenses from the gels.
You need to put the red and blue stage lighting gel in each lens to make the goggles.Use a marker to trace the original welders on the red and blue sheets.Cut the gel to match the shape of the lens.The gels can be damaged by small cuts across the lens.
Step 9: The welding goggles should be put into the lenses.
Attach 4 of each color to the welding goggles after cutting the gel lens.Two red and two blue glasses should be placed on one side and the other side.If the goggles don't fit, they may be too large or small.Cut them to size or discard them and make a replacement lens.
Step 10: You can test your goggles with bright light.
When you've finished your goggles, put them on and go outside.If the sky looks darker and objects look like shades of pink and violet, you can see the light through your goggles.Don't look directly into the sun with your goggles on.When you're not wearing goggles, looking at the sun can damage your eyes.