The first step in creating a solid home network is the installation of a routers.How do you set it up after you've purchased it?This guide will show you how to set up a secure wireless network.
Step 1: There is a possibility that this is not the case.
There are a number of factors that can be used to determine which wireless device is best for you.They include distance, interference, transfer speed, and security.The distance between the device you are connecting to and the router is one of the most important factors to consider.The more expensive the routers, the more stable the connection will be at further distances.The amount of signal interference is a factor to consider.If you have more than one device that operates on the 2.4 GHz band, you can interfere with the signal.The 5 GHz band is less prone to interference due to being less crowded.The 5 GHz signals don't travel as far as the 2.4 GHz ones.Transfer speed is something to consider.The newer routers claim to be able to transfer data up to 450 Mbps.This may be helpful when moving data between two computers over a network, but it won't increase your internet speed.There are three main speeds to choose from.It is important to note that these speeds are impossible to achieve in any environment other than a clean room.The latest form of wireless encryption is called WPA2.If you're buying an older, second-hand routers, this is something to consider.A WEP key can be cracked in a few minutes.
Step 2: The modem needs to be connected to the routers.
You will need to connect your modem to your router after you've purchased it.There is a port in the back labeled "WAN/WLAN/Internet".Use a standard cable to connect this port to the modem.Make sure the router is turned on.
Step 3: Attach a computer to a cable.
If you want to set up the wireless router before connecting any wireless devices, this is a very useful step.If you want to tinker with the wireless settings without losing your connection, you can connect a computer through a physical cable.Plug it in next to your computer while you adjust the settings for optimum efficiency.You can change the location of the router after configuring it.
Step 4: The software needs to be installed.
If you install the software on a computer that is connected to the router via a cable, it will work.Setting up a routers can be a lot more convenient if you use the bundled software.You can use the software to designate the name of your wireless network and the type of security that you want to use.WPA2 is the most secure network.You can choose a password.Most software will detect your internet settings.This is the information that the internet service provider needs to translate your internet connection to other devices.
Step 5: The configuration page is where you can open it.
You will need to use your web browser to connect to the router's configuration page if you didn't get any installation software.Go to your browser and enter the web address.This can be either 192.168.0.1 or 192.168.1.1You can find the exact address by looking at the documentation.You will be asked for a password and a usernames.The documentation that came with your routers provided these.Password or admin is a typical default.
Step 6: Your internet connection information can be entered.
This includes your internet service provider's information.This section will be filled in by most routers.If you need to enter information, contact your internet service provider.
Step 7: You should set your wireless settings.
The Wireless settings section is at the top of the menu.You can change the network name, enable or disabling the wireless signal from this section.You can set the name of the network by selecting the field.Your network will be detected by any device that displays this name.If you live in an area with a lot of public traffic, make sure you don't put any identifiable information in the SSID as anyone can see it.Make sure that the latest version of the encryption is set.Most of the time, this will be WPA2.The password for WPA2 is a single one.You can enter whatever you want, but a strong password is needed.Passwords with letters, numbers, and symbols are stronger.
Step 8: You should apply your settings.
When you are done changing the settings, make sure you click the Apply or Save Changes button.Your new settings will take effect when the routers processes for a moment.
Step 9: Place your device.
If you want to get the best signal, place your router in a central location.Walls and doors can degrade the signal.If you have more than one floor, you may want to consider multiple routers.It must be connected to your modem in order to place the routers.
Step 10: The device needs to be connected to the network.
If you want to test the connection, you can use a device such as a computer, a phone, or a tablet to look for wireless networks.Scan for new networks.The network icon can be found in the lower-right corner of the desktop.Look for your SSID when you connect to a network.The AirPort icon in the menu bar looks like 3 curved lines.You can choose from the list of available networks.
Step 11: The password can be entered.
To connect to the network, you will need to enter your password.If you are using a private computer, you can change the hidden characters on the system to make it easier to remember passwords.
Step 12: Test your connection.
When you are connected to the network, wait a moment for your address to be assigned.If you try to connect to a website you don't normally visit, you will not be loading the website from memory.