When the lights match a blinking blue and solid green pattern, then press Discover Device and you are asked to join the Sync Module Wi-Fi network. Tap Join, and then select your Wi-Fi network from the available choices. Carefully enter your Wi-Fi password and tap Join on your keyboard.
Why is my blink not connecting to Wi-Fi?
Restart your device, or try switching the Wi-Fi setting off and on again to establish a connection. Make sure your mobile device is within range of your router or access point. Check that your router and any access points are powered on. Restarting your Wi-Fi router may also resolve this issue.
How do I reconnect my blink camera?
One of the ways is trying to reconnect your Blink camera to the Blink camera application. The Blink Sync Module can be reset and rebooted to setup mode by pressing and holding the reset button until a red light shows. This process usually takes between 15 seconds to half a minute.May 5, 2020
Does blink camera connect to Wi-Fi or sync module?
Blink's original Indoor, XT, and XT2 cameras will only connect to the same Wi-Fi SSID that the Sync Module is connected to. To set up these cameras with an extender, be sure to rename the Wi-Fi extender SSID to be the same the main Wi-Fi network, and use the same password.
Do blink cameras require Wi-Fi?
Blink cameras can't operate offline and require a 2.4 GHz Wi-Fi Internet connection. One important reason is because cameras use Wi-Fi to send images and notifications. Blink systems minimally require a high speed connection of at least 2 Mbps upload speed.
Why won't my Blink camera connect to my Wi-Fi?
Restart your device, or try switching the Wi-Fi setting off and on again to establish a connection. Make sure your mobile device is within range of your router or access point. Check that your router and any access points are powered on. Restarting your Wi-Fi router may also resolve this issue.