- From the home screen, tap the Add Device + icon.
- The Add Device screen displays your device options.
- The serial number is also printed as a QR code. ...
- Create a new system by tapping the text entry box and providing a name.
How do I connect my blink camera to the SYNC module?
To add a Sync Module, navigate to the Home screen and tap the "add device" + button in the upper right. You are sent to the Add Device screen. 6. Tap Blink wireless camera system.
Where is the QR code on Blink?
On the Blink app Home screen, tap the + icon in the top right corner. 2. Tap the Blink mini camera as indicated by an arrow in the image below. You are taken to the “Scan QR Code” screen, where your camera may request permission to scan the QR code.
Why won't my Blink Sync module connect to the Internet?
Restart your device, or try switching the Wi-Fi setting off and on again to establish a connection. Make sure your mobile device is within range of your router or access point. Check that your router and any access points are powered on. Restarting your Wi-Fi router may also resolve this issue.
How do I factory reset my Blink Sync module?
To reset the module, you will press and hold the reset button on the device's side—next to the USB port—until the light turns red. This may take 15-30 seconds. You will know that the reset was successful when you see one solid green light and one flashing blue light.Oct 29, 2020
How do I get my blink module back online?
Tap the banner to reach the Sync Module Offline screen. Follow the suggested steps from the Sync Module Offline screen. Verify Wi-Fi connection is working: Reboot the router and wait for internet to return. Verify your Sync Module is displaying a solid green and solid blue light.
How do I resync my blink camera?
To reset a Blink camera, reset the Sync Module by holding down the button on the module's side until its light turns red; this resets the Blink camera system and requires reinstalling the module in the Blink app to use the camera again.Oct 29, 2020
What does connection reset mean on Blink camera?
When the power goes out or your Wi-Fi drops (often for no good reason), your Blink cameras can become disconnected. Therefore, you may need to reset your Sync Module to reconfigure its network connection. ... This reset will allow you to reconfigure your device settings and prompt you to put in new Wi-Fi credentials.Oct 30, 2020
How do I reconnect my Blink Sync module?
If you are having any issues with your Sync Module, it is best to first power cycle the Sync Module by unplugging the power cord from the back of the unit for 10 seconds and then plug it back in. This should cause the device to reboot and then reconnect within 45 seconds displaying a solid blue and solid green light.
Does blink camera connect to WIFI or sync module?
Blink's original Indoor, XT, and XT2 cameras will only connect to the same Wi-Fi SSID that the Sync Module is connected to. To set up these cameras with an extender, be sure to rename the Wi-Fi extender SSID to be the same the main Wi-Fi network, and use the same password.
How do I reconnect my blink camera to Wi-Fi?
To start, tap the settings icon for the Mini camera you want to change. From the the Camera Settings screen scroll down to the bottom and tap Change Wi-Fi. In the Change Wi-Fi screen, follow the instruction to "Press and release the reset button on the camera until red and blue lights flash.
Why is my Blink Sync module blinking blue?
The blinking blue light indicates that your camera has already acquired the router information, but the network is poor. You can try as following: ... Reboot your router.
Why am I having trouble connecting to Wi-Fi?
Software issues might come up if you have a computer virus, which could disable or block your ability to connect to Wi-Fi. You'll want to scan your computer or device for viruses and remove any if found. Then restart your computer and try connecting again.Feb 28, 2019