- Take your In-Home Display to where your electricity meter is located.
- Once you're close to the meter, hold down the “OK button” until the In-Home Display turns off and then on again.
- You should then see the message: “your smart meter is now paired”.
Why has my smart meter stopped working?
To restore the lost connection to your smart meter, you'll need to: Take your In-Home Display to where your electricity meter is located. Once you're close to the meter, hold down the “OK button” until the In-Home Display turns off and then on again. You should then see the message: “your smart meter is now paired”.
How do I reset my smart meter monitor?
To reset it it turn it right off by holding down the power button for 10 seconds and then power it back on again, it should work.
How do I connect my IHD smart meter?
- Press Menu/OK to bring up the menu.
- Press the forward Arrow until you see Settings [OK]
- Menu/OK to select Settings.
- Press the forward Arrow until you see Switch on Wi-Fi and press Menu/OK.
- Press the forward Arrow until you see Join Network and press Menu/OK.
How do I pair my smart meter display?
It usually takes about three hours. Press and hold the power button on the back of your smart meter display to turn it on. To turn it off, press and hold the same button for five seconds. Each time you turn the smart meter display on, it will show 'Welcome to IHD2' then 'Attempting to pair'.
Why is my smart meter monitor not working?
If your smart energy monitor stops working check your power cable is inserted correctly and that your power supply is switched on at the wall. If it's still not working, try using batteries. If batteries fix the issue, then the problem is with the cable.
Where is the reset button on a smart meter?
https://www.youtube.com/watch?v=s-K77DunQ_Y
Why is my smart meter not sending meter readings?
If your smart meter stops communicating readings to us, this is usually because of poor meter signal. Your meter may also be obstructed by an object, like a ladder for instance. Make sure there are no obstructions for a stronger signal.
Why is my smart meter not working?
If your In-Home Display stops working, it won't affect your smart meter, and won't cut off the energy supply to your home. If your In-Home Display screen is blank, it could be that it's run out of power. Plug it back in to recharge it, and press the round flat button on the back to restart it.
How often should my smart meter sends readings?
about one second each day
What happens if your smart meter stops working?
But if your smart meter stops working in smart mode, you'll need to take manual meter readings again. Some in-home displays show your meter readings. You'll usually need to scroll through the different screens to find them. You can also find your meter reading on your smart electricity meter and gas smart meter.
How do I reset my electric smart meter?
Unplug your in- home smart meter display if your display isn't updating. For five seconds, hold the power button. Plug the display back in and then switch it on.