Press the “Drain and Spin” button on the washer's control panel to attempt to unlock the machine. This may drain any excess water that could cause the machine to remain locked. Once the “Drain and Spin” cycle completes, the door should unlock.
How do I turn off the lock on my Whirlpool washing machine?
Press the button for that dedicated key to activate and deactivate the Control Lock. To turn off Control Lock, press and hold the Options key that says "Control Lock Hold 3 Sec" under it for 3 seconds.Jun 15, 2020
How do you manually unlock a washing machine door?
https://www.youtube.com/watch?v=Fd8ddreBYL4
How do I get my washing machine to unlock?
You can unlock front-load washing machines within the first 5 minutes of the cycle by pressing the Start / Pause button. Your washing machine will check if it's safe, and if the water level isn't too high or the water too hot, it will allow you to open it.
How do you reset a locked Whirlpool washer?
Unplug your Whirlpool washer and leave it unplugged for 45 minutes. After 45 minutes, plug your washer back in. The washer's programming should be reset and the door should open.
Why is my washer stuck on lock?
The most common cause is water left in the machine. Try running a spin/drain cycle. If this fails, the machine can be drained by placing the washing machine drain hose lower than the drum (into a bucket or tray). The door interlock has simply jammed.
How do you force a washing machine to unlock?
Turn the washing machine off and unplug it. If pausing the cycle doesn't unlock the door, turn the machine off. Then, unplug the machine and wait 5-10 minutes. Try pulling the handle again to see if the door opens. This is the most common solution for top loaders.
How do you bypass a washing machine door lock?
One of the main ways of bypassing a washing machine door lock is by disabling the safety circuit. It is good to note that the process involves cutting of electrical wires. Thus, you need to disconnect your machine from the main power supply. Additional, cutting the cord may void your warranty.Jul 1, 2020
How do you manually unlock a front load washer?
- Turn off and unplug the washer/dryer.
- Close the water faucet.
- Wait until the drum has stopped rotating – never open the door while the drum is in motion.
- Wait until water and laundry have cooled down when washing with high temperatures.