How to fix a "SUD" error on a washing machine
How to get rid of the SUD Error Code.The washing machine's error code is EXCESSIVE SOAP IN WASHER DRUM.If the SUD error displays on your washer, it means the detergent is too much.What can be done to fix the error code?The methods below will show you how to fix the common "sud" code on most washers.If the type of washer you have is "undefined", try a reset.
There are too many soap suds in the drum.The wrong type of detergent was used.The washer has too much foam in it.When the suds have been reduced, the washer will resume the wash cycle.A foam level sensor is used to sense this.
The detergent you are using is not made for washing machines.You are using too much detergent.It's not a quality detergent if you use too much soap.Non HE detergent has high sudsing properties and will cause excessive amounts of suds.The washer foam level sensor has failed and shown the SUD error.SUD code is caused by a clog in the lines or drain.If(typeof_ez_fad_position!= 'undefined')
The SUDS should be reduced by giving the washer some time.Run the washer empty and program a longer wash cycle with the hottest water temp setting to remove the SUDS.
The washer foam level sensor might be malfunctioning.The pressure switch is the same as the water level sensor.The issue of SUD could be caused by one of these parts.The SUD code may appear before the wash cycle starts and before any water has filled the washing machine.This can mean the sensor is malfunctioning.
Do you need to find the right part for your washer?There are different washer sensors that will fit your washing machine.
The washer codes are the same for both SUD and 5D.There are multiple codes for the same error.The SUD code is similar to the 5d and Sd error codes.The number 5 is hard to see on a small display.
Do you have questions about the SUD code on your washing machine?We can assist if you have tried following the steps above.When asking a question, please give us the model number of your washer.