Dowsing rods can be used to find underground water sources, metal deposits, lost objects, and earth energy lines.Some people use divining rods to talk to the dead.Many modern dowsers make their own divining rods from two L-shaped wires.
Step 1: There is a Y-shaped branch.
The branch can come from a tree or bush.From tip to tip, search for a branch that is at least a foot long.If your dowsing rod is unbalanced, make sure the forks are equal in length.Look for twigs that have already broken, perhaps by the passing of a deer or something more mysterious.If you see a perfect Y-shape that is still growing from a tree, break it off and use it.If you want to break the branch from the tree, do it with intention.Don't make a mistake by smashing trees to pieces.You should think about the tree, the surrounding area, and why you are using the dowsing rod.If you have taken something from the tree, consider leaving something of your own behind.
Step 2: Try to locate the branch in the same area.
Try to find your dowsing rod nearby if you're going to explore an unfamiliar stretch of woods or look for water in a mysterious valley.Look for a tree at the rim of the valley.Many dowsers prefer that their rods are freshly cut, while others prefer to use branches from particular trees.In Europe and the US, hazel and witch-hazel branches are used.Most of these branches are popular because they are light and porous, and many people believe that the rods from these trees can better absorb fumes from buried metals or water, which weighs down the un-forked end so that it points toward the source.
Step 3: The dowsing rod should be decorated.
You can use the branch if you find it, but you can also use your own mark on the rod.If you plan to give it to someone as a gift, this is even better.Consider carving into the dowsing rod.Wrap beads or charms around the wood, or even paint it.Wrap fabric around the forks of the rod to make it more comfortable to hold.This can be used as decoration.
Step 4: Place one fork in each hand.
The bottom section of the Y is where the dowsing rod is.Make sure that the fork is parallel to the ground.Learn how to use divining rods to get into the right spot.
Step 5: Purchase two equal lengths of wire, each about 20 inches long.
Any sturdy but bendable material can be used for the wire.If you want an easy divining rod, try cutting a wire coat hanger into two equal pieces.The rod material should be chosen based on availability and purpose.Because they don't rust, brass and copper are very popular.It won't hurt to work with what you already have, if you have wire fencing or coat hangers readily available.To trim the metal, use a pair of wire cutter.The wires must be 20 inches long.Make sure that they are able to dip their own accord and hold on.
Step 6: Attach each wire to a "L" shape.
The twist is 5 inches from one end if your wires are 20 inches long.The angle in the wire should be created by the bend.The handle of the rod will be the short leg.As you approach what you are looking for, the long legs will guide you.
Step 7: The handles should be made.
The handles should cover the legs of the L-shaped rods.The handles give you a firm grip.The only way to make a usable handle is with what you have.There is a hole through the center of the 1 inch rod.Attach cotton reels together into a cylinder.You can use a pen.Thread the wire through the pen body after removing the guts and caps.You can pass the wire through the straws.Wrap a rag, cloth, or piece of felt around the shorter leg of the "L"Use rubber bands, twine, or a safety pin to tie the cloth in place.
Step 8: When doing dowsing, hold one rod in each hand.
The longer leg of the "L" should be parallel with the ground if you hold the wire by the handle.Hold the dowsing rods in a way that they can swing freely from one side to the other.The rods are 9 inches apart and should be held at arms length away from the body.The rods should be parallel with the ground or tipped downward.Learn how to use divining rods to find what you need.The butt of the handle should fit into the heel of your hand, as the rod should rest flat over your index finger.The rods must float freely, so don't hold the handles.Close your hand to improve stability.