Whether you're conducting a science experiment or baking a dessert, measuring liquids accurately is important.It is possible to do it quickly and easily.Pick the right kind of measuring device, keep it eye level when you measure, and record your measurements based on where the bottom of the meniscus falls.
Step 1: To get an eye level with measuring cups, bend down.
A standard liquid measuring cup should have at least 1 to 2 inches of space above the red measuring lines.Pouring will be easier with these features.If you want your measurement to be accurate, bend down and look at the measuring cup straight on instead of at an angle.
Step 2: As you pour, look at the measuring cups.
An angle measuring cup will allow you to get an accurate measurement without bending down.Look down into the measuring cup to make sure you measure the right amount.
Step 3: Bring measuring spoons to eye level.
Standard measuring spoons can be used to measure small amounts of liquid.The spoon level should be straight across from your eyes.The liquid should be trickled into the measuring spoon.
Step 4: When the meniscus is at the bottom of the line, stop.
The liquid will appear higher near the glass walls of the cup than it will be in the middle.The liquid has a surface called the meniscus.The graduation line is at the bottom of the meniscus.
Step 5: Pour with one hand and steady the cylinder with the other.
Science experiments use graduated cylinders to measure volume.If you want to avoid spilling the liquid, hold the cylinder on a flat surface and use your other hand to pour.
Step 6: The cylinder needs to be brought up to eye level.
When measuring with a graduated cylinder, it's best to bring it up to eye level, rather than bending down, so that the risk of knocking the cylinder over is smaller.It's important if you're measuring chemicals.
Step 7: The measurement can be determined by seeing where the knee falls.
Determine which horizontal line on the cylinder is closest to the lowest point in the water to read the measurement.The molecule in the water are more attracted to the glass than to each other.
Step 8: Carefully read the instructions or label of the medication.
Whether you're measuring out and administering over-the-counter liquid medication or prescription medication, it's important to first read the instructions.Direct instruction on how much to take and how often is included on prescription labels.What it is used for, how to use it, and what's in it are some of the important information on over-the-counter medication labels.
Step 9: To get an accurate dosage, weigh the person taking the medication.
Dosage can be determined by age or weight when measuring and administering over-the-counter medications.You can use the scale to find out how much medication is needed.Depending on age or time alone, some medications determine dosage.If this is the case, simply take the recommended amount for your age and/or don't take another dose until the instructions specify that it's safe to do so.
Step 10: The medication comes with a measuring device.
Many over-the-counter liquid medications come with a measuring device, which is always better to use than other measuring tools.If you misplace the device that came with the medication, don't use a standard liquid measuring cup to measure it.Measuring with a household device is fine, but the one that came with your medicine is the safest bet because it was made specifically for administering it.There are some types of measuring devices that may come with your medication.
Step 11: The medication should be put at eye level.
Similar to when you're measuring liquids for cooking or science experiments, you need to be eye level in order to get an accurate measurement.If the medication comes with a measuring cup, set it on a flat surface and bend it down when you put it in.When you pour, hold the device at eye level.