What does the tub clean cycle do?
Responsive design allows for a convenient experience that matches your device's screen size.To get the best experience from our website, please follow the instructions below.
If you're using Internet Explorer 9 or earlier, you will need to use an alternate browser or upgrade to a newer version of internet Explorer.
It is recommended that you keep your washing machine clean.You will learn how to clean your tub, dispenser, water inlet filters, and the exterior part of your machine from this help library content.
To clean the gasket around the drum and door glass, use a solution of bleach and water.Front Load only.
Tub cleaning keeps your washing machine in top shape by removing detergent build up and keeping your wash drum clean.The Tub Clean cycle can be run once per month or every 30 cycles.
According to the package instructions, the washing machine tub cleaner is recommended for most effective results.
Liquid Chlorine Bleach or White Distilled Vinegar can be used for monthly maintenance, however they are not as effective as washing machine tub cleaners at removing detergents and hard water build up.
You can close the drawer and lid by pressing Start/Palace.When the cycle is over, open the lid and wait for the washer to cool down.
As soon as the wash cycle is over, it's a good idea to remove items from the washer.wrinkling, color transfer and odor can be caused by leaving damp clothing in the washer.
Cleaning the drain pump filter is very important to keep your unit from leaking.
The drain hose is located next to the drain pump, unclip it, and remove the plug from it to drain the water from the wash tub.
Don't pull the hose too far out, it will cause a problem, and prevent the water from draining out.
The water should be drained into a bucket or pan.Pull the pump filter counter-clockwise to remove the water from the washer after draining the drain hose.
Use warm water and a soft bristle brush to clean the pump filter.Do not use the dish washer to wash the pump filter.
To clean the drain filter opening, use a soft bristle brush to remove debris from the base of the washing machine.
The drain hose should be pushed all the way back.It should not be damaged.
Make sure the drain pump filter is securely inserted into the washing machine.The drain pump filter cover needs to be closed.
Make sure the filter is tightened all the way when you insert it.Once it is tightened, it should stop turning.
The detergent dispensers need to be cleaned properly.Tiny debris, which are not easily visible, can cause the compartment to overfill and leak.
Pull the dispensers towards you.There is a depressed tab between the bleach and softener compartment.Pull the detergent tray out of the washer when pushing down on the tab.
If something is blocking the flow of water into the drum, look inside the compartment to see if it's there.
Once the detergent dispensers are removed, disassemble the tray and clean the attachments with warm water and a soft bristle brush.The underside of the tray needs to be cleaned.
The detergent dispensers should be replaced after the detergent is cleaned and washed.
If you live in an area with hard water, your water's inlet filters can get blocked over time.An error message will be displayed if the water is not entering the dispensers correctly.Cleaning the water inlet filters will help your washer run more smoothly.
You can turn off your washer by pressing the power button.The water taps should be turned off completely.
There will be some water left in the hoses after the water supply is turned on.You can empty that water by placing a bucket beneath the hoses.
The filters need to be pulled out of the inlet valves.
If you want to remove lime scale, soak them in white vinegar.Don't damage the water inlets.All signs of build-up are gone when you wash thoroughly in warm water.
Before returning, rinse thoroughly.Attach the water lines by pressing the filters back into place.
Cleaning the exterior of your front load washer can keep it looking good.Warm water and a detergent can be used to clean it.Use a damp cloth to wipe off spills.
Do not use steel wool or abrasive cleaners.They could cause damage to the machine.
At the end of each wash day, the door and gasket should be wiped dry.It will help to keep them free of hair and lint.Both should be cleaned at least once a month.Failure to do so will cause the door to leak.
Dilute 34 cup of liquid chlorine bleach with 1 gallon of warm/hot water.If you want, use it in place of bleach.Don't use the two at the same time.
The gasket should be cleaned using a cloth and cleaning solution.Clean the gasket under it by pulling the lip back.
It's a good idea to clean the inside of the door and the bottom of it.
Straight bleach can cause the gasket to degrade over time and should not be used to clean it.
Tub cleaning keeps your washing machine in top shape by removing detergent build up and keeping your wash drum clean.The Tub Clean cycle can be run once per month or every 30 cycles.
According to the package instructions, the washing machine tub cleaner is recommended for most effective results.
Liquid Chlorine Bleach or White Distilled Vinegar can be used for monthly maintenance, however they are not as effective as washing machine tub cleaners at removing detergents and hard water build up.
You can close the drawer and lid by pressing Start/Palace.When the cycle is over, open the lid and wait for the washer to cool down.
The detergent dispensers need to be cleaned properly.Tiny debris, which are not easily visible, can cause the compartment to overfill and leak.
Pull the dispensers towards you.There is a depressed tab between the bleach and softener compartment.Pull the detergent tray out of the washer when pushing down on the tab.
If something is blocking the flow of water into the drum, look inside the compartment to see if it's there.
Once the detergent dispensers are removed, disassemble the tray and clean the attachments with warm water and a soft bristle brush.The underside of the tray needs to be cleaned.
The detergent dispensers should be replaced after the detergent is cleaned and washed.
If you live in an area with hard water, your water's inlet filters can get blocked over time.An error message will be displayed if the water is not entering the dispensers correctly.Cleaning the water inlet filters will help your washer run more smoothly.
You can turn off your washer by pressing the power button.The water taps should be turned off completely.
There will be some water left in the hoses after the water supply is turned on.You can empty that water by placing a bucket beneath the hoses.
The filters need to be pulled out of the inlet valves.
If you want to remove lime scale, soak them in white vinegar.Don't damage the water inlets.All signs of build-up are gone when you wash thoroughly in warm water.
Before returning, rinse thoroughly.Attach the water lines by pressing the filters back into place.
Cleaning the exterior of your front load washer can keep it looking good.Warm water and a detergent can be used to clean it.Use a damp cloth to wipe off spills.
Do not use steel wool or abrasive cleaners.They could cause damage to the machine.
Sanmi is the author of a help library article.Please let him know what you think about the page.
We apologize for the time delay.
Get answers to your questions about product setup, use and care.We can help.