Why is my Kenmore Elite washing machine not spinning?
Why is my Kenmore Elite washing machine not spinning?
A Kenmore washer that won't spin or remains stuck on the spin cycle likely has a defective lid switch, door latch, drive motor, stator assembly, or drive belt. A quick fix would be to look for blockages in the agitator or manually turn the drum to force the appliance to go into a spin cycle.
Does Kenmore Elite washer have a reset button?
If you have started a load in your Kenmore Elite HE washer and need to reset it, simply press several buttons on the control panel.
What is wrong with my washing machine when it won't spin?
Drain pump blockage One of the most common reasons why your washing machine has stopped spinning is when it can't drain properly due to a blocked drain pump. This can happen when something gets stuck in the outlet pipe, preventing the steady flow of water in and out of the machine.
Why won't my Kenmore washer spin and drain?
If the washer won't drain water the drain pump might be defective. It's also common for a small sock or other article of clothing to get caught in the drain pump or in the drain hose. Check both for an obstruction before replacing the pump. If the washer won't drain there might be a clogged pump or hose.16 mar 2014
How do I run diagnostics on my Kenmore Elite washer?
- With the washer empty, close the door.
- Push “control/on” or “Start”
- Select “Drain/Spin”
- Select “No Spin” by pressing SPIN SPEED touchpad.
- Push “PREWASH” option four times within 5 seconds. (If there is no PREWASH option, press RINSE HOLD 4 times in 5 seconds.)
- C:00 should light up and begin the diagnostic.
How do I fix the error on my Kenmore Elite washer?
Reconnect any loose wires or replace the wire harness if it's damaged. Check the wire harness connections between the tachometer and the electronic control board. Reconnect any loose wires or replace the wire harness if it's damaged.
How do I reset my Kenmore Elite Oasis washer?
- Press “Stop” to clear the current cycle on the washer.
- Press the “Power” button to turn off the washer. Unplug the washer from the power supply.
- Wait several minutes. ...
- Select the desired wash cycle and press “Start.”